lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/6] net: ocelot: pre-compute injection frame header content
Le Wed, 3 Nov 2021 14:53:51 +0100,
Clément Léger <clement.leger@bootlin.com> a écrit :

> Le Wed, 3 Nov 2021 12:38:12 +0000,
> Vladimir Oltean <vladimir.oltean@nxp.com> a écrit :
>
> > On Wed, Nov 03, 2021 at 10:19:40AM +0100, Clément Léger wrote:
> > > IFH preparation can take quite some time on slow processors (up to
> > > 5% in a iperf3 test for instance). In order to reduce the cost of
> > > this preparation, pre-compute IFH since most of the parameters are
> > > fixed per port. Only rew_op and vlan tag will be set when sending
> > > if different than 0. This allows to remove entirely the calls to
> > > packing() with basic usage. In the same time, export this function
> > > that will be used by FDMA.
> > >
> > > Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> > > ---
> >
> > Honestly, this feels a bit cheap/gimmicky, and not really the
> > fundamental thing to address. In my testing of a similar idea (see
> > commits 67c2404922c2 ("net: dsa: felix: create a template for the DSA
> > tags on xmit") and then 7c4bb540e917 ("net: dsa: tag_ocelot: create
> > separate tagger for Seville"), the net difference is not that stark,
> > considering that now you need to access one more memory region which
> > you did not need before, do a memcpy, and then patch the IFH anyway
> > for the non-constant stuff.
>
> The memcpy is neglectable and the patching happens only in a few
> cases (at least vs the packing function call). The VSC7514 CPU is really
> slow and lead to 2.5% up to 5% time spent in packing() when using iperf3
> and depending on the use case (according to ftrace).
>
> >
> > Certainly, for the calls to ocelot_port_inject_frame() from DSA, I
> > would prefer not having this pre-computed IFH.
> >
> > Could you provide some before/after performance numbers and perf
> > counters?
>
> I will make another round of measure to confirm my previous number and
> check the impact on the injection rate on ocelot.

I checked again my bandwith numbers (obtained with iperf3) with and
without the pre-computed header:

Test on standard packets with UDP (iperf3 -t 100 -l 1460 -u -b 0 -c *)
- With pre-computed header: UDP TX: 33Mbit/s
- Without UDP TX: 31Mbit/s
-> 6.5% improvement

Test on small packets with UDP (iperf3 -t 100 -l 700 -u -b 0 -c *)
- With pre-computed header: UDP TX: 15.8Mbit/s
- Without UDP TX: 16.4Mbit/s
-> 4.3% improvement

The improvement might not be huge but also not negligible at all.
Please tell me if you want me to drop it or not based on those numbers.

>
> >
> > > drivers/net/ethernet/mscc/ocelot.c | 23 ++++++++++++++++++-----
> > > include/soc/mscc/ocelot.h | 5 +++++
> > > 2 files changed, 23 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/mscc/ocelot.c
> > > b/drivers/net/ethernet/mscc/ocelot.c index
> > > e6c18b598d5c..97693772595b 100644 ---
> > > a/drivers/net/ethernet/mscc/ocelot.c +++
> > > b/drivers/net/ethernet/mscc/ocelot.c @@ -1076,20 +1076,29 @@ bool
> > > ocelot_can_inject(struct ocelot *ocelot, int grp) }
> > > EXPORT_SYMBOL(ocelot_can_inject);
> > >
> > > +void ocelot_ifh_port_set(void *ifh, struct ocelot_port *port, u32
> > > rew_op,
> > > + u32 vlan_tag)
> > > +{
> > > + memcpy(ifh, port->ifh, OCELOT_TAG_LEN);
> > > +
> > > + if (vlan_tag)
> > > + ocelot_ifh_set_vlan_tci(ifh, vlan_tag);
> > > + if (rew_op)
> > > + ocelot_ifh_set_rew_op(ifh, rew_op);
> > > +}
> > > +EXPORT_SYMBOL(ocelot_ifh_port_set);
> > > +
> > > void ocelot_port_inject_frame(struct ocelot *ocelot, int port, int
> > > grp, u32 rew_op, struct sk_buff *skb)
> > > {
> > > + struct ocelot_port *port_s = ocelot->ports[port];
> > > u32 ifh[OCELOT_TAG_LEN / 4] = {0};
> > > unsigned int i, count, last;
> > >
> > > ocelot_write_rix(ocelot, QS_INJ_CTRL_GAP_SIZE(1) |
> > > QS_INJ_CTRL_SOF, QS_INJ_CTRL, grp);
> > >
> > > - ocelot_ifh_set_bypass(ifh, 1);
> > > - ocelot_ifh_set_dest(ifh, BIT_ULL(port));
> > > - ocelot_ifh_set_tag_type(ifh, IFH_TAG_TYPE_C);
> > > - ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb));
> > > - ocelot_ifh_set_rew_op(ifh, rew_op);
> > > + ocelot_ifh_port_set(ifh, port_s, rew_op,
> > > skb_vlan_tag_get(skb));
> > > for (i = 0; i < OCELOT_TAG_LEN / 4; i++)
> > > ocelot_write_rix(ocelot, ifh[i], QS_INJ_WR, grp);
> > > @@ -2128,6 +2137,10 @@ void ocelot_init_port(struct ocelot *ocelot,
> > > int port)
> > > skb_queue_head_init(&ocelot_port->tx_skbs);
> > >
> > > + ocelot_ifh_set_bypass(ocelot_port->ifh, 1);
> > > + ocelot_ifh_set_dest(ocelot_port->ifh, BIT_ULL(port));
> > > + ocelot_ifh_set_tag_type(ocelot_port->ifh, IFH_TAG_TYPE_C);
> > > +
> > > /* Basic L2 initialization */
> > >
> > > /* Set MAC IFG Gaps
> > > diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> > > index fef3a36b0210..b3381c90ff3e 100644
> > > --- a/include/soc/mscc/ocelot.h
> > > +++ b/include/soc/mscc/ocelot.h
> > > @@ -6,6 +6,7 @@
> > > #define _SOC_MSCC_OCELOT_H
> > >
> > > #include <linux/ptp_clock_kernel.h>
> > > +#include <linux/dsa/ocelot.h>
> > > #include <linux/net_tstamp.h>
> > > #include <linux/if_vlan.h>
> > > #include <linux/regmap.h>
> > > @@ -623,6 +624,8 @@ struct ocelot_port {
> > >
> > > struct net_device *bridge;
> > > u8 stp_state;
> > > +
> > > + u8 ifh[OCELOT_TAG_LEN];
> > > };
> > >
> > > struct ocelot {
> > > @@ -754,6 +757,8 @@ void __ocelot_target_write_ix(struct ocelot
> > > *ocelot, enum ocelot_target target, bool ocelot_can_inject(struct
> > > ocelot *ocelot, int grp); void ocelot_port_inject_frame(struct
> > > ocelot *ocelot, int port, int grp, u32 rew_op, struct sk_buff *skb);
> > > +void ocelot_ifh_port_set(void *ifh, struct ocelot_port *port, u32
> > > rew_op,
> > > + u32 vlan_tag);
> > > int ocelot_xtr_poll_frame(struct ocelot *ocelot, int grp, struct
> > > sk_buff **skb); void ocelot_drain_cpu_queue(struct ocelot *ocelot,
> > > int grp);
> > > --
> > > 2.33.0
> >
>
>
>



--
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com

\
 
 \ /
  Last update: 2021-11-15 11:18    [W:0.096 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site