lkml.org 
[lkml]   [2021]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] arm64: dts: qcom: Add support for the sc7280 CRD board
Date
Add support for sc7280 CRD (Compute Reference Design) Board.
It shares the same EC and H1 as the IDP2 boards, comes with an eDP
display and supports both touch and trackpad.
Since the EC and H1 nodes are identical across CRD and IDP2 this
series also adds support for EC/H1 on IDP2 devices.

Kshitiz Godara (2):
arm64: dts: qcom: sc7280: Define EC and H1 nodes for IDP/CRD
arm64: dts: qcom: sc7280-crd: Add Touchscreen and touchpad support

Rajendra Nayak (2):
dt-bindings: arm: qcom: Document qcom,sc7280-crd board
arm64: dts: qcom: sc7280-crd: Add device tree files for CRD

Documentation/devicetree/bindings/arm/qcom.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 93 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 105 ++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 1 +
5 files changed, 202 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-crd.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi

--
2.7.4

\
 
 \ /
  Last update: 2021-11-29 12:35    [W:0.101 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site