Messages in this thread Patch in this message | | | From | cgel.zte@gmail ... | Subject | [PATCH] clk: imx: Use div64_ul instead of do_div | Date | Wed, 17 Nov 2021 01:38:53 +0000 |
| |
From: Changcheng Deng <deng.changcheng@zte.com.cn>
do_div() does a 64-by-32 division. If the divisor is unsigned long, using div64_ul can avoid truncation to 32-bit.
Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> --- drivers/clk/imx/clk-pllv3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c index 20ee9611ba6e..55497e0585a6 100644 --- a/drivers/clk/imx/clk-pllv3.c +++ b/drivers/clk/imx/clk-pllv3.c @@ -247,7 +247,7 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate, div = rate / parent_rate; temp64 = (u64) (rate - div * parent_rate); temp64 *= mfd; - do_div(temp64, parent_rate); + div64_ul(temp64, parent_rate); mfn = temp64; temp64 = (u64)parent_rate; @@ -277,7 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, div = rate / parent_rate; temp64 = (u64) (rate - div * parent_rate); temp64 *= mfd; - do_div(temp64, parent_rate); + div64_ul(temp64, parent_rate); mfn = temp64; val = readl_relaxed(pll->base); @@ -334,7 +334,7 @@ static struct clk_pllv3_vf610_mf clk_pllv3_vf610_rate_to_mf( /* rate = parent_rate * (mfi + mfn/mfd) */ temp64 = rate - parent_rate * mf.mfi; temp64 *= mf.mfd; - do_div(temp64, parent_rate); + div64_ul(temp64, parent_rate); mf.mfn = temp64; } -- 2.25.1
| |