lkml.org 
[lkml]   [2021]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] clk: imx: Use div64_ul instead of do_div
Date
From: Changcheng Deng <deng.changcheng@zte.com.cn>

do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
---
drivers/clk/imx/clk-pllv3.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index 20ee9611ba6e..55497e0585a6 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -247,7 +247,7 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
div = rate / parent_rate;
temp64 = (u64) (rate - div * parent_rate);
temp64 *= mfd;
- do_div(temp64, parent_rate);
+ temp64 = div64_ul(temp64, parent_rate);
mfn = temp64;

temp64 = (u64)parent_rate;
@@ -277,7 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
div = rate / parent_rate;
temp64 = (u64) (rate - div * parent_rate);
temp64 *= mfd;
- do_div(temp64, parent_rate);
+ temp64 = div64_ul(temp64, parent_rate);
mfn = temp64;

val = readl_relaxed(pll->base);
@@ -334,7 +334,7 @@ static struct clk_pllv3_vf610_mf clk_pllv3_vf610_rate_to_mf(
/* rate = parent_rate * (mfi + mfn/mfd) */
temp64 = rate - parent_rate * mf.mfi;
temp64 *= mf.mfd;
- do_div(temp64, parent_rate);
+ temp64 = div64_ul(temp64, parent_rate);
mf.mfn = temp64;
}

--
2.25.1
\
 
 \ /
  Last update: 2021-11-18 09:07    [W:0.058 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site