lkml.org 
[lkml]   [2021]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v11 1/4] HID: wacom_sys: Add support for flipping the data values
Date
Add support to the Wacom HID device for flipping the values based on
device tree settings. This allows us to support devices where the panel
is installed in a different orientation, such as the reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
.../bindings/input/hid-over-i2c.txt | 20 ++++++
drivers/hid/wacom_sys.c | 25 ++++++++
drivers/hid/wacom_wac.c | 61 +++++++++++++++++++
drivers/hid/wacom_wac.h | 13 ++++
4 files changed, 119 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2..16ebd7c46049 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -33,6 +33,26 @@ device-specific compatible properties, which should be used in addition to the
- post-power-on-delay-ms: time required by the device after enabling its regulators
or powering it on, before it is ready for communication.

+ flip-tilt-x:
+ type: boolean
+ description: Flip the tilt X values read from device
+
+ flip-tilt-y:
+ type: boolean
+ description: Flip the tilt Y values read from device
+
+ flip-pos-x:
+ type: boolean
+ description: Flip the X position values read from device
+
+ flip-pos-y:
+ type: boolean
+ description: Flip the Y position values read from device
+
+ flip-distance:
+ type: boolean
+ description: Flip the distance values read from device
+
Example:

i2c-hid-dev@2c {
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 93f49b766376..47d9590b10bd 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -10,6 +10,7 @@

#include "wacom_wac.h"
#include "wacom.h"
+#include <linux/of.h>
#include <linux/input/mt.h>

#define WAC_MSG_RETRIES 5
@@ -2730,6 +2731,28 @@ static void wacom_mode_change_work(struct work_struct *work)
return;
}

+static void wacom_of_read(struct hid_device *hdev, struct wacom_wac *wacom_wac)
+{
+ if (IS_ENABLED(CONFIG_OF)) {
+ wacom_wac->flip_tilt_x = of_property_read_bool(hdev->dev.parent->of_node,
+ "flip-tilt-x");
+ wacom_wac->flip_tilt_y = of_property_read_bool(hdev->dev.parent->of_node,
+ "flip-tilt-y");
+ wacom_wac->flip_pos_x = of_property_read_bool(hdev->dev.parent->of_node,
+ "flip-pos-x");
+ wacom_wac->flip_pos_y = of_property_read_bool(hdev->dev.parent->of_node,
+ "flip-pos-y");
+ wacom_wac->flip_distance = of_property_read_bool(hdev->dev.parent->of_node,
+ "flip-distance");
+ } else {
+ wacom_wac->flip_tilt_x = false;
+ wacom_wac->flip_tilt_y = false;
+ wacom_wac->flip_pos_x = false;
+ wacom_wac->flip_pos_y = false;
+ wacom_wac->flip_distance = false;
+ }
+}
+
static int wacom_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
@@ -2797,6 +2820,8 @@ static int wacom_probe(struct hid_device *hdev,
error);
}

+ wacom_of_read(hdev, wacom_wac);
+
wacom_wac->probe_complete = true;
return 0;
}
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 33a6908995b1..c01f683e23fa 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3261,6 +3261,63 @@ static int wacom_status_irq(struct wacom_wac *wacom_wac, size_t len)
return 0;
}

+static int wacom_of_irq(struct wacom_wac *wacom_wac, size_t len)
+{
+ const struct wacom_features *features = &wacom_wac->features;
+ unsigned char *data = wacom_wac->data;
+ struct input_dev *input = wacom_wac->pen_input;
+ unsigned int x, y, pressure;
+ unsigned char tsw, f1, f2, ers;
+ short tilt_x, tilt_y, distance;
+
+ if (!IS_ENABLED(CONFIG_OF))
+ return 0;
+
+ tsw = data[1] & WACOM_TIP_SWITCH_bm;
+ ers = data[1] & WACOM_ERASER_bm;
+ f1 = data[1] & WACOM_BARREL_SWITCH_bm;
+ f2 = data[1] & WACOM_BARREL_SWITCH_2_bm;
+ x = le16_to_cpup((__le16 *)&data[2]);
+ y = le16_to_cpup((__le16 *)&data[4]);
+ pressure = le16_to_cpup((__le16 *)&data[6]);
+
+ /* Signed */
+ tilt_x = get_unaligned_le16(&data[9]);
+ tilt_y = get_unaligned_le16(&data[11]);
+
+ distance = get_unaligned_le16(&data[13]);
+
+ /* keep touch state for pen events */
+ if (!wacom_wac->shared->touch_down)
+ wacom_wac->tool[0] = (data[1] & 0x0c) ?
+ BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+
+ wacom_wac->shared->touch_down = data[1] & 0x20;
+
+ // Flip the values based on properties from the device tree
+
+ // Default to a negative value for distance as HID compliant Wacom
+ // devices generally specify the hovering distance as negative.
+ distance = wacom_wac->flip_distance ? distance : -distance;
+ x = wacom_wac->flip_pos_x ? (features->x_max - x) : x;
+ y = wacom_wac->flip_pos_y ? (features->y_max - y) : y;
+ tilt_x = wacom_wac->flip_tilt_x ? -tilt_x : tilt_x;
+ tilt_y = wacom_wac->flip_tilt_y ? -tilt_y : tilt_y;
+
+ input_report_key(input, BTN_TOUCH, tsw || ers);
+ input_report_key(input, wacom_wac->tool[0], wacom_wac->shared->touch_down);
+ input_report_key(input, BTN_STYLUS, f1);
+ input_report_key(input, BTN_STYLUS2, f2);
+ input_report_abs(input, ABS_X, x);
+ input_report_abs(input, ABS_Y, y);
+ input_report_abs(input, ABS_PRESSURE, pressure);
+ input_report_abs(input, ABS_DISTANCE, distance);
+ input_report_abs(input, ABS_TILT_X, tilt_x);
+ input_report_abs(input, ABS_TILT_Y, tilt_y);
+
+ return 1;
+}
+
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
{
bool sync;
@@ -3379,6 +3436,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
sync = wacom_remote_irq(wacom_wac, len);
break;

+ case HID_GENERIC:
+ sync = wacom_of_irq(wacom_wac, len);
+ break;
+
default:
sync = false;
break;
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index 8b2d4e5b2303..4dd5a56bf347 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -157,6 +157,14 @@
#define WACOM_HID_WT_Y (WACOM_HID_UP_WACOMTOUCH | 0x131)
#define WACOM_HID_WT_REPORT_VALID (WACOM_HID_UP_WACOMTOUCH | 0x1d0)

+// Bitmasks (for data[3])
+#define WACOM_TIP_SWITCH_bm (1 << 0)
+#define WACOM_BARREL_SWITCH_bm (1 << 1)
+#define WACOM_ERASER_bm (1 << 2)
+#define WACOM_INVERT_bm (1 << 3)
+#define WACOM_BARREL_SWITCH_2_bm (1 << 4)
+#define WACOM_IN_RANGE_bm (1 << 5)
+
#define WACOM_BATTERY_USAGE(f) (((f)->hid == HID_DG_BATTERYSTRENGTH) || \
((f)->hid == WACOM_HID_WD_BATTERY_CHARGING) || \
((f)->hid == WACOM_HID_WD_BATTERY_LEVEL))
@@ -357,6 +365,11 @@ struct wacom_wac {
bool has_mode_change;
bool is_direct_mode;
bool is_invalid_bt_frame;
+ bool flip_tilt_x;
+ bool flip_tilt_y;
+ bool flip_pos_x;
+ bool flip_pos_y;
+ bool flip_distance;
};

#endif
--
2.31.1
\
 
 \ /
  Last update: 2021-10-09 13:44    [W:0.178 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site