lkml.org 
[lkml]   [2021]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: rockchip: Enable the phy driver when controller is enabled
Date
The PCI controller on rk3399 requires the phy to correctly initialise
the PCIE phy. Without phy initialisation the host and end-point
controllers cannot be used.

To prevent building an unusable PCIe driver on rk3399, enable the phy
driver when the host or end-point driver is enabled.

Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
---
Hi,

I've been caught out many times when booting off of PCI and finding
that the kernel cannot find rootfs due to the missing phy driver. The
patch should prevents this by fixing the Kconfig dependency
enablement.

Thanks,
Punit

drivers/pci/controller/Kconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 326f7d13024f..1965df38c4a3 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -214,6 +214,7 @@ config PCIE_ROCKCHIP_HOST
depends on PCI_MSI_IRQ_DOMAIN
select MFD_SYSCON
select PCIE_ROCKCHIP
+ select PHY_ROCKCHIP_PCIE
help
Say Y here if you want internal PCI support on Rockchip SoC.
There is 1 internal PCIe port available to support GEN2 with
@@ -226,6 +227,7 @@ config PCIE_ROCKCHIP_EP
depends on PCI_ENDPOINT
select MFD_SYSCON
select PCIE_ROCKCHIP
+ select PHY_ROCKCHIP_PCIE
help
Say Y here if you want to support Rockchip PCIe controller in
endpoint mode on Rockchip SoC. There is 1 internal PCIe port
--
2.33.0
\
 
 \ /
  Last update: 2021-10-19 14:03    [W:0.134 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site