lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/22] PCI: mvebu: Use SET_PCI_ERROR_RESPONSE() when device not found
Date
An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error. There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use SET_PCI_ERROR_RESPONSE() to set the error response, when a faulty
read occurs.

This helps unify PCI error response checking and make error check
consistent and easier to find.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
drivers/pci/controller/pci-mvebu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index ed13e81cd691..51d61194a31a 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -654,7 +654,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,

port = mvebu_pcie_find_port(pcie, bus, devfn);
if (!port) {
- *val = 0xffffffff;
+ SET_PCI_ERROR_RESPONSE(val);
return PCIBIOS_DEVICE_NOT_FOUND;
}

@@ -664,7 +664,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
size, val);

if (!mvebu_pcie_link_up(port)) {
- *val = 0xffffffff;
+ SET_PCI_ERROR_RESPONSE(val);
return PCIBIOS_DEVICE_NOT_FOUND;
}

--
2.25.1
\
 
 \ /
  Last update: 2021-10-11 20:01    [W:0.639 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site