lkml.org 
[lkml]   [2021]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/22] PCI: aardvark: Use SET_PCI_ERROR_RESPONSE() when device not found
On Monday 11 October 2021 23:26:33 Naveen Naidu wrote:
> An MMIO read from a PCI device that doesn't exist or doesn't respond
> causes a PCI error. There's no real data to return to satisfy the
> CPU read, so most hardware fabricates ~0 data.
>
> Use SET_PCI_ERROR_RESPONSE() to set the error response, when a faulty
> read occurs.
>
> This helps unify PCI error response checking and make error check
> consistent and easier to find.
>
> Compile tested only.
>
> Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
> ---
> drivers/pci/controller/pci-aardvark.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index 596ebcfcc82d..dc2f820ef55f 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -894,7 +894,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> int ret;
>
> if (!advk_pcie_valid_device(pcie, bus, devfn)) {
> - *val = 0xffffffff;
> + SET_PCI_ERROR_RESPONSE(val);

Hello! Now I'm looking at this macro, and should not it depends on
"size" argument? If doing 8-bit or 16-bit read operation then should not
it rather sets only low 8 bits or low 16 bits to ones?

> return PCIBIOS_DEVICE_NOT_FOUND;
> }
>
> @@ -920,7 +920,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> *val = CFG_RD_CRS_VAL;
> return PCIBIOS_SUCCESSFUL;
> }
> - *val = 0xffffffff;
> + SET_PCI_ERROR_RESPONSE(val);
> return PCIBIOS_SET_FAILED;
> }
>
> @@ -955,14 +955,14 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
> *val = CFG_RD_CRS_VAL;
> return PCIBIOS_SUCCESSFUL;
> }
> - *val = 0xffffffff;
> + SET_PCI_ERROR_RESPONSE(val);
> return PCIBIOS_SET_FAILED;
> }
>
> /* Check PIO status and get the read result */
> ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
> if (ret < 0) {
> - *val = 0xffffffff;
> + SET_PCI_ERROR_RESPONSE(val);
> return PCIBIOS_SET_FAILED;
> }
>
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2021-10-11 20:10    [W:0.199 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site