lkml.org 
[lkml]   [2021]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] scsi_logging: print cdb into new line after opcode
Date
The current log message results in a line like the following where
the first byte is duplicated, giving a wrong impression:

sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 60 40 00 00 01 00

Print the cdb into a new line in any case, not only when cmd_len is
greater than 16. The above example error will then read:

sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28
28 00 01 c0 09 00 00 00 08 00

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
drivers/scsi/scsi_logging.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
index 8ea44c6595ef..0081d3936f83 100644
--- a/drivers/scsi/scsi_logging.c
+++ b/drivers/scsi/scsi_logging.c
@@ -200,10 +200,11 @@ void scsi_print_command(struct scsi_cmnd *cmd)
if (off >= logbuf_len)
goto out_printk;

+ /* Print opcode in one line and use separate lines for CDB */
+ off += scnprintf(logbuf + off, logbuf_len - off, "\n");
+
/* print out all bytes in cdb */
if (cmd->cmd_len > 16) {
- /* Print opcode in one line and use separate lines for CDB */
- off += scnprintf(logbuf + off, logbuf_len - off, "\n");
dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf);
for (k = 0; k < cmd->cmd_len; k += 16) {
size_t linelen = min(cmd->cmd_len - k, 16);
@@ -224,7 +225,6 @@ void scsi_print_command(struct scsi_cmnd *cmd)
goto out;
}
if (!WARN_ON(off > logbuf_len - 49)) {
- off += scnprintf(logbuf + off, logbuf_len - off, " ");
hex_dump_to_buffer(cmd->cmnd, cmd->cmd_len, 16, 1,
logbuf + off, logbuf_len - off,
false);
--
2.20.1
\
 
 \ /
  Last update: 2021-01-22 09:44    [W:0.043 / U:1.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site