lkml.org 
[lkml]   [2021]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] PM / clk: make PM clock layer compatible with clocks that must sleep
On Thu, Jan 21, 2021 at 1:11 PM Naresh Kamboju
<naresh.kamboju@linaro.org> wrote:
>
> On Thu, 21 Jan 2021 at 16:28, Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> >
> > On Thu, Jan 21, 2021 at 10:13 AM Naresh Kamboju
> > <naresh.kamboju@linaro.org> wrote:
> > > On Tue, 5 Jan 2021 at 08:48, Nicolas Pitre <npitre@baylibre.com> wrote:
> > > >
> > > > The clock API splits its interface into sleepable ant atomic contexts:
> > > >
> > > > - clk_prepare/clk_unprepare for stuff that might sleep
> > > >
> > > > - clk_enable_clk_disable for anything that may be done in atomic context
> > > >
> > >
> > > <trim>
> > >
> > > >
> > > > Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
> > > >
> > > > diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
> > > > index ced6863a16..a62fb0f9b1 100644
> > > > --- a/drivers/base/power/clock_ops.c
> > > > +++ b/drivers/base/power/clock_ops.c
> > >
> > > <trim>
> > >
> > > > @@ -64,17 +166,20 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
> > > > ce->clk = clk_get(dev, ce->con_id);
> > > > if (IS_ERR(ce->clk)) {
> > > > ce->status = PCE_STATUS_ERROR;
> > > > + return;
> > > > + } else if (clk_is_enabled_when_prepared(ce->clk)) {
> > >
> > > arm-linux-gnueabihf-ld: drivers/base/power/clock_ops.o: in function
> > > `pm_clk_acquire':
> > > drivers/base/power/clock_ops.c:170: undefined reference to
> > > `clk_is_enabled_when_prepared'
> > >
> > > Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
> > >
> > > This build error was noticed on arm architecture on linux next 20210121 tag.
> > > Following builds failed.
> > > - arm (omap1_defconfig) with clang-10 - FAILED
> > > - arm (omap1_defconfig) with clang-11 - FAILED
> > >
> > > - arm (omap1_defconfig) with gcc-8 - FAILED
> > > - arm (omap1_defconfig) with gcc-9 - FAILED
> > > - arm (omap1_defconfig) with gcc-10 - FAILED
> >
> > Missing dummy clk_is_enabled_when_prepared() for the
> > !CONFIG_HAVE_CLK case?
>
> I see these configs enabled in failed builds config file,
>
> CONFIG_HAVE_CLK=y
> CONFIG_CLKDEV_LOOKUP=y
> CONFIG_HAVE_LEGACY_CLK=y
>
> ref:
> https://builds.tuxbuild.com/1nN0vkpNP4qhvIuIJN12j7tTpQs/

So I'm going to drop this patch from linux-next until the issue is
resolved, thanks!

\
 
 \ /
  Last update: 2021-01-21 15:48    [W:2.988 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site