Messages in this thread Patch in this message | | | From | Mike Looijmans <> | Subject | [PATCH v6 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings | Date | Tue, 19 Jan 2021 13:46:21 +0100 |
| |
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, the accelerometer part.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
Changes in v6: I't been almost a year since the last commit, sorry... Fixed the yaml errors Add interrupt, vdd and vddio properties
Changes in v5: submit together with driver code as patch series
Changes in v2: convert to yaml format
.../bindings/iio/accel/bosch,bmi088.yaml | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml new file mode 100644 index 000000000000..459b9969fd12 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI088 IMU accelerometer part + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +description: | + Acceleration part of the IMU sensor with an SPI interface + Specifications about the sensor can be found at: + https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf + +properties: + compatible: + enum: + - bosch,bmi088_accel + + reg: + maxItems: 1 + + vdd-supply: true + + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + description: | + Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW. + The first interrupt listed must be the one connected to the INT1 pin, the + second must be the one connected to the INT2 pin. + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + bmi088_accel@1 { + compatible = "bosch,bmi088_accel"; + reg = <1>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio6>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + }; + }; +... -- 2.17.1
| |