lkml.org 
[lkml]   [2021]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings
From
Date
Comments inlined below.


Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@topicproducts.com
W: www.topicproducts.com

Please consider the environment before printing this e-mail
On 20-01-2021 19:50, Jonathan Cameron wrote:
> On Tue, 19 Jan 2021 13:46:21 +0100
> Mike Looijmans <mike.looijmans@topic.nl> wrote:
>
>> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
>> the accelerometer part.
>>
>> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>>
>> ---
>>
>> Changes in v6:
>> I't been almost a year since the last commit, sorry...
> No problem. Happens to us all sometimes!
>
> One thing inline below.
>
> Thanks,
>
> Jonathan
>
>> Fixed the yaml errors
>> Add interrupt, vdd and vddio properties
>>
>> Changes in v5:
>> submit together with driver code as patch series
>>
>> Changes in v2:
>> convert to yaml format
>>
>> .../bindings/iio/accel/bosch,bmi088.yaml | 55 +++++++++++++++++++
>> 1 file changed, 55 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>> new file mode 100644
>> index 000000000000..459b9969fd12
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
>> @@ -0,0 +1,55 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Bosch BMI088 IMU accelerometer part
>> +
>> +maintainers:
>> + - Mike Looijmans <mike.looijmans@topic.nl>
>> +
>> +description: |
>> + Acceleration part of the IMU sensor with an SPI interface
>> + Specifications about the sensor can be found at:
>> + https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - bosch,bmi088_accel
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + vdd-supply: true
>> +
>> + vddio-supply: true
>> +
>> + interrupts:
>> + minItems: 1
>> + maxItems: 2
>> + description: |
>> + Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
>> + The first interrupt listed must be the one connected to the INT1 pin, the
>> + second must be the one connected to the INT2 pin.
>
> What if the board only has the INT2 pin connected?
> That's looks to be a valid hardware configuration.
>
> I'd suggest using interrupt-names to cover this.

Yeah makes sense. The pins have the same functionality, so either one will do.

>
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> + spi {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + bmi088_accel@1 {
>> + compatible = "bosch,bmi088_accel";
>> + reg = <1>;
>> + spi-max-frequency = <10000000>;
>> + interrupt-parent = <&gpio6>;
>> + interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
>> + };
>> + };
>> +...
>

\
 
 \ /
  Last update: 2021-01-21 09:52    [W:0.167 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site