Messages in this thread Patch in this message | | | From | Chris Healy <> | Date | Sun, 5 Jul 2020 17:51:04 -0700 | Subject | [PATCH] ARM: dts: vf610-zii-dev-rev-c.dts: Configure fibre port to 1000BaseX |
| |
The SFF soldered onto the board expects the port to use 1000BaseX. It makes no sense to have the port set to SGMII, since it doesn't even support that mode.
Signed-off-by: Chris Healy <cphealy@gmail.com> --- arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 778e02c000d1..de79dcfd32e6 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -164,7 +164,7 @@ port@9 { reg = <9>; label = "sff2"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff2>; }; -- 2.21.3
| |