lkml.org 
[lkml]   [2020]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: dts: vf610-zii-dev-rev-c.dts: Configure fibre port to 1000BaseX
Hi Chris,

In the Subject you could remove the .dts from the dts name:

ARM: dts: vf610-zii-dev-rev-c: Configure fibre port to 1000BaseX

On Sun, Jul 5, 2020 at 9:51 PM Chris Healy <cphealy@gmail.com> wrote:
>
> The SFF soldered onto the board expects the port to use 1000BaseX. It
> makes no sense to have the port set to SGMII, since it doesn't even
> support that mode.
>
> Signed-off-by: Chris Healy <cphealy@gmail.com>
> ---
> arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
> b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
> index 778e02c000d1..de79dcfd32e6 100644
> --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
> +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
> @@ -164,7 +164,7 @@
> port@9 {
> reg = <9>;
> label = "sff2";
> - phy-mode = "sgmii";
> + phy-mode = "1000base-x";

Looks like tabs were converted to spaces.

\
 
 \ /
  Last update: 2020-07-08 20:41    [W:0.060 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site