lkml.org 
[lkml]   [2020]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/4] Add system mmu support for Armada-806
Date
The series is meant to support SMMU for AP806 and a workaround
for accessing ARM SMMU 64bit registers is the gist of it.

For the record, AP-806 can't access SMMU registers with 64bit width.
This patches split the readq/writeq into two 32bit accesses instead
and update DT bindings.

The series was successfully tested on a vanilla v5.8-rc3 kernel and
Intel e1000e PCIe NIC. The same for platform devices like SATA and USB.

For reference, previous versions are listed below:
V1: https://lkml.org/lkml/2018/10/15/373
V2: https://lkml.org/lkml/2019/7/11/426
V3: https://lkml.org/lkml/2020/7/2/1114

v3 -> v4
- call cfg_probe() impl hook a bit earlier which simplifies errata handling
- use hi_lo_readq_relaxed() and hi_lo_writeq_relaxed() for register accessors
- keep SMMU status disabled by default and enable where possible (DTS changes)
- commit logs improvements and other minor fixes

Hanna Hawa (1):
iommu/arm-smmu: Workaround for Marvell Armada-AP806 SoC erratum
#582743

Marcin Wojtas (1):
arm64: dts: marvell: add SMMU support

Tomasz Nowicki (2):
iommu/arm-smmu: Call configuration impl hook before consuming features
dt-bindings: arm-smmu: add compatible string for Marvell Armada-AP806
SMMU-500

Documentation/arm64/silicon-errata.rst | 3 ++
.../devicetree/bindings/iommu/arm,smmu.yaml | 4 ++
arch/arm64/boot/dts/marvell/armada-7040.dtsi | 28 ++++++++++++
arch/arm64/boot/dts/marvell/armada-8040.dtsi | 40 +++++++++++++++++
arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 18 ++++++++
drivers/iommu/arm-smmu-impl.c | 45 +++++++++++++++++++
drivers/iommu/arm-smmu.c | 11 +++--
7 files changed, 145 insertions(+), 4 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2020-07-15 09:07    [W:1.541 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site