lkml.org 
[lkml]   [2020]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
Date
From: Thierry Reding <treding@nvidia.com>

The RTC present on MAX77620 can be used to generate an alarm at a given
time, which in turn can be used as a wakeup source for the system if it
is properly wired up.

Document how to enable the RTC to act as a wakeup source.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
.../devicetree/bindings/mfd/max77620.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
index 5a642a51d58e..f05005b0993e 100644
--- a/Documentation/devicetree/bindings/mfd/max77620.txt
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -125,6 +125,17 @@ MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
control) then, GPIO1/nRST_IO goes LOW.
this property is valid for max20024 only.

+Realtime Clock
+--------------
+The MAX77620 family of power management ICs contain a realtime clock block
+that can be used to keep track of time even when the system is powered off.
+
+The realtime clock can also be programmed to trigger alerts, which can be
+used to wake the system up from sleep. In order to configure the RTC to act
+as a wakeup source, add an "rtc" child node and add the "wakeup-source"
+property.
+
+
For DT binding details of different sub modules like GPIO, pincontrol,
regulator, power, please refer respective device-tree binding document
under their respective sub-system directories.
@@ -159,4 +170,8 @@ max77620@3c {
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_SW>;
};
};
+
+ rtc {
+ wakeup-source;
+ };
};
--
2.24.1
\
 
 \ /
  Last update: 2020-04-17 19:09    [W:0.649 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site