lkml.org 
[lkml]   [2020]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] dt-bindings: mfd: Document the RTC present on MAX77620
On 01/05/2020 08:00:11-0500, Rob Herring wrote:
> > I don't think this is true because in the case of a discrete RTC, its
> > interrupt pin can be connected directly to a PMIC to power up a board
> > instead of being connected to the SoC. In that case we don't have an
> > interrupt property but the RTC is still a wakeup source. This is the
> > usual use case for wakeup-source in the RTC subsystem. Else, if there is
> > an interrupt, then we assume the RTC is a wakeup source and there is no
> > need to have the wakeup-source property.
>
> Yes, that would be an example of "unless the wakeup mechanism is
> somehow not an interrupt". I guess I should add not an interrupt from
> the perspective of the OS.
>
> So if the wakeup is self contained within the PMIC, why do we need a
> DT property? The capability is always there and enabling/disabling
> wakeup from it is userspace policy.
>

Yes, for this particular case, I'm not sure wakeup-source is actually
necessary. If the interrupt line is used to wakeup the SoC, then the
presence of the interrupts property is enough to enable wakeup.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-05-01 15:53    [W:0.090 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site