lkml.org 
[lkml]   [2020]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 00/23] irqchip/gic-v4: GICv4.1 architecture support
Date
This (now shorter) series expands the existing GICv4 support to deal
with the new GICv4.1 architecture, which comes with a set of major
improvements compared to v4.0:

- One architectural doorbell per vcpu, instead of one doorbell per VLPI

- Doorbell entirely managed by the HW, with an "at most once" delivery
guarantee per non-residency phase and only when requested by the
hypervisor

- A shared memory scheme between ITSs and redistributors, allowing for an
optimised residency sequence (the use of VMOVP becomes less frequent)

- Support for direct virtual SGI delivery (the injection path still involves
the hypervisor), at the cost of losing the active state on SGIs. It
shouldn't be a big deal, but some guest operating systems might notice
(Linux definitely won't care).

On the other hand, public documentation is not available yet, so that's a
bit annoying...

The series is roughly organised in 3 parts:

(0) Fixes
(1) v4.1 doorbell management
(2) Virtual SGI support
(3) Plumbing of virtual SGIs in KVM

Notes:

- The whole thing is tested on a FVP model, which can be obtained
free of charge on ARM's developer website. It requires you to
create an account, unfortunately... You'll need a fix for the
devicetree that is in the kernel tree (should be merged before
the 5.6 release).

- This series has uncovered a behaviour that looks like a HW bug on
the Cavium ThunderX (aka TX1) platform. I'd very much welcome some
clarification from the Marvell/Cavium folks on Cc, as well as an
official erratum number if this happens to be an actual bug.

[v3 update]
People have ignored for two months now, and it is fairly obvious
that support for this machine is slowly bit-rotting. Maybe I'll
drop the patch and instead start the process of removing all TX1
support from the kernel (we'd certainly be better off without it).

[v4 update]
TX1 is now broken in mainline, and nobody cares. Make of this what
you want.

- I'm extremely grateful for Zenghui Yu's huge effort in carefully
reviewing this rather difficult series (if we ever get to meet
face to face, drinks are definitely on me!).

- Unless someone cries wolf, I plan to take this into 5.7.

* From v4 [4]
- Rebased on v5.6-rc4
- Fixed locking all over the shop now that we can bypass the ITS
- Wait on INVALL at the RD level
- Plentu of cleanups/fixes thanks to Zenghui's careful review effort

* From v3 [3]:
- Rebased on v5.6-rc1
- Considerably smaller thanks to the initial patches being merged
- Small bug fix after the v5.6 merge window

* From v2 [2]:
- Another bunch of fixes thanks to Zenghui Yu's very careful review
- HW-accelerated SGIs are now optional thanks to new architected
discovery/selection bits exposed by KVM and used by the guest kernel
- Rebased on v5.5-rc2

* From v1 [1]:
- A bunch of minor reworks after Zenghui Yu's review
- A workaround for what looks like a new and unexpected TX1 bug
- A subtle reorder of the series so that some patches can go in early

[1] https://lore.kernel.org/lkml/20190923182606.32100-1-maz@kernel.org/
[2] https://lore.kernel.org/lkml/20191027144234.8395-1-maz@kernel.org/
[3] https://lore.kernel.org/r/20191224111055.11836-1-maz@kernel.org/
[4] https://lore.kernel.org/r/20200214145736.18550-1-maz@kernel.org/

Marc Zyngier (22):
irqchip/gic-v3: Use SGIs without active state if offered
irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors
irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change
and RD access
irqchip/gic-v4.1: Ensure mutual exclusion betwen invalidations on the
same RD
irqchip/gic-v4.1: Advertise support v4.1 to KVM
irqchip/gic-v4.1: Map the ITS SGIR register page
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction
layer
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Eagerly vmap vPEs
KVM: arm64: GICv4.1: Let doorbells be auto-enabled
KVM: arm64: GICv4.1: Add direct injection capability to SGI registers
KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts
KVM: arm64: GICv4.1: Plumb SGI implementation selection in the
distributor
KVM: arm64: GICv4.1: Reload VLPI configuration on distributor
enable/disable
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs

Zenghui Yu (1):
irqchip/gic-v4.1: Wait for completion of redistributor's INVALL
operation

arch/arm/include/asm/kvm_host.h | 1 +
arch/arm64/include/asm/kvm_emulate.h | 3 +-
arch/arm64/include/asm/kvm_host.h | 1 +
drivers/irqchip/irq-gic-v3-its.c | 385 +++++++++++++++++++++++--
drivers/irqchip/irq-gic-v3.c | 13 +-
drivers/irqchip/irq-gic-v4.c | 134 ++++++++-
include/kvm/arm_vgic.h | 4 +
include/linux/irqchip/arm-gic-common.h | 2 +
include/linux/irqchip/arm-gic-v3.h | 20 +-
include/linux/irqchip/arm-gic-v4.h | 25 +-
virt/kvm/arm/arm.c | 8 +
virt/kvm/arm/vgic/vgic-debug.c | 14 +-
virt/kvm/arm/vgic/vgic-mmio-v3.c | 68 ++++-
virt/kvm/arm/vgic/vgic-mmio.c | 88 +++++-
virt/kvm/arm/vgic/vgic-v3.c | 6 +-
virt/kvm/arm/vgic/vgic-v4.c | 137 +++++++--
virt/kvm/arm/vgic/vgic.h | 1 +
17 files changed, 844 insertions(+), 66 deletions(-)

--
2.20.1

\
 
 \ /
  Last update: 2020-03-04 21:35    [W:0.378 / U:3.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site