Messages in this thread | | | From | Michael Walle <> | Subject | Re: [PATCH v2 net-next/devicetree 0/5] DT bindings for Felix DSA switch on LS1028A | Date | Sat, 22 Feb 2020 14:33:13 +0100 |
| |
> This series officializes the device tree bindings for the embedded > Ethernet switch on NXP LS1028A (and for the reference design board). > The driver has been in the tree since v5.4-rc6. > > As per feedback received in v1, I've changed the DT bindings for the > internal ports from "gmii" to "internal". So I would like the entire > series to be merged through a single tree, be it net-next or devicetree. > If this happens, I would like the other maintainer to acknowledge this > fact and the patches themselves. Thanks. > > Claudiu Manoil (2): > arm64: dts: fsl: ls1028a: add node for Felix switch > arm64: dts: fsl: ls1028a: enable switch PHYs on RDB > > Vladimir Oltean (3): > arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC > RCIE > net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII > dt-bindings: net: dsa: ocelot: document the vsc9959 core
For all patches except 5/5 (because it was tested on a custom board) and with patch from [1] applied:
Tested-by: Michael Walle <michael@walle.cc>
-michael
[1] https://patchwork.ozlabs.org/patch/1239296/
> > .../devicetree/bindings/net/dsa/ocelot.txt | 96 +++++++++++++++++++ > .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 51 ++++++++++ > .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 85 +++++++++++++++- > drivers/net/dsa/ocelot/felix.c | 3 +- > drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +- > 5 files changed, 232 insertions(+), 6 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt
-- 2.17.1
| |