lkml.org 
[lkml]   [2020]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 net-next/devicetree 5/5] arm64: dts: fsl: ls1028a: enable switch PHYs on RDB
Date
From: Claudiu Manoil <claudiu.manoil@nxp.com>

Link the switch PHY nodes to the central MDIO controller PCIe endpoint
node on LS1028A (implemented as PF3) so that PHYs are accessible via
MDIO.

Enable SGMII AN on the Felix PCS by telling PHYLINK that the VSC8514
quad PHY is capable of in-band-status.

The PHYs are used in poll mode due to an issue with the interrupt line
on current revisions of the LS1028A-RDB board.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2:
None.

.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index afb55653850d..9353c00e46a7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -194,6 +194,57 @@
status = "disabled";
};

+&enetc_mdio_pf3 {
+ /* VSC8514 QSGMII quad PHY */
+ qsgmii_phy0: ethernet-phy@10 {
+ reg = <0x10>;
+ };
+
+ qsgmii_phy1: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ qsgmii_phy2: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+
+ qsgmii_phy3: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&mscc_felix_port0 {
+ status = "okay";
+ label = "swp0";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy0>;
+ phy-mode = "qsgmii";
+};
+
+&mscc_felix_port1 {
+ status = "okay";
+ label = "swp1";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy1>;
+ phy-mode = "qsgmii";
+};
+
+&mscc_felix_port2 {
+ status = "okay";
+ label = "swp2";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy2>;
+ phy-mode = "qsgmii";
+};
+
+&mscc_felix_port3 {
+ status = "okay";
+ label = "swp3";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy3>;
+ phy-mode = "qsgmii";
+};
+
&sai4 {
status = "okay";
};
--
2.17.1
\
 
 \ /
  Last update: 2020-02-19 16:13    [W:0.319 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site