lkml.org 
[lkml]   [2020]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] v3u: enable I2C0-6
Date
These patches are needed to enable I2C on the Falcon board for the V3U.
Patch #5 is only for demonstration purposes. The series depends on my
RWDT series, Ulrich's PFC v2 series and Geert's DMA placeholder. A
branch can be found here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/v3u/i2c

There is also a series in-flight to handle spurious interrupts on the
V3U. Because I have never seen one, I wouldn't call it a dependency, so
the series is handled seperately.

Looking forward to comments...


Koji Matsuoka (2):
arm64: dts: renesas: Add I2C to R8A779A0
arm64: dts: renesas: Add I2C support for falcon board

Wolfram Sang (3):
dt-bindings: i2c: renesas,i2c: add r8a779a0 (V3U) support
clk: renesas: r8a779a0: add clocks for I2C
v3u: enable other I2C busses for testing

.../devicetree/bindings/i2c/renesas,i2c.txt | 1 +
.../boot/dts/renesas/r8a779a0-falcon.dts | 93 +++++++++++++
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 122 ++++++++++++++++++
drivers/clk/renesas/r8a779a0-cpg-mssr.c | 7 +
4 files changed, 223 insertions(+)

--
2.28.0

\
 
 \ /
  Last update: 2020-12-23 18:27    [W:0.095 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site