lkml.org 
[lkml]   [2020]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/4] DCMI BT656 parallel bus mode support
Hi Alexandre,

On Thu, Nov 05, 2020 at 10:26:37AM +0100, Alexandre Torgue wrote:
> Hi Huges
>
> On 11/4/20 6:32 PM, Hugues Fruchet wrote:
> > Add support of BT656 embedded synchronization bus.
> > This mode allows to save hardware synchro lines hsync & vsync
> > by replacing them with synchro codes embedded in data stream.
> > Add "bus-type" property and make it required so that there is no
> > ambiguity between parallel mode (bus-type=5) and BT656 mode (bus-type=6).
> >
> > ===========
> > = history =
> > ===========
> > version 5:
> > - Add revisited bindings and devicetree with explicit use of "bus-type"
> >
> > version 4:
> > - Fix typo in commit message
> >
> > version 3:
> > - Fix bus_width print to %u as per Sakari comment
> >
> > version 2:
> > - As per Sakari remark, revisit commit message and document
> > BT656 parallel bus mode in bindings
> >
> > version 1:
> > - Initial submission
> >
> > Hugues Fruchet (4):
> > media: stm32-dcmi: add support of BT656 bus
> > media: dt-bindings: media: st,stm32-dcmi: add support of BT656 bus
> > ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1
> > board
> > ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval
> > board
> >
> > .../devicetree/bindings/media/st,stm32-dcmi.yaml | 38 ++++++++++++++++++++++
> > arch/arm/boot/dts/stm32429i-eval.dts | 1 +
> > arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
> > drivers/media/platform/stm32/stm32-dcmi.c | 37 +++++++++++++++++++--
> > 4 files changed, 75 insertions(+), 2 deletions(-)
> >
>
> I'll take DT patches on stm32-next tree.

Just checking: that is only the two last patches in the set, or also the
binding patch?

--
Regards,

Sakari Ailus

\
 
 \ /
  Last update: 2020-11-06 12:54    [W:0.074 / U:3.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site