lkml.org 
[lkml]   [2020]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC
On Thu, Nov 05, 2020 at 06:32:31PM +0000, Matteo Scordino wrote:
> The Elimo Engineering Initium is an Open Source Hardware Single Board
> Computer based on the Elimo Impetus SoM.
>
> It is meant as the first development platform for the Impetus, providing
> convenient access to the peripherals on the Impetus.
>
> It provides:
> USB-C power input
> UART-to-USB bridge on the USB-C connector, connected to UART1
> USB-A connector for USB2.0 (Host, Device, OTG)
> Audio Line In/Out
> Pin header to access all signals on the M2 connector of the SoM
>
> Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>

Applied all three patches, thanks!
Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-06 11:48    [W:0.219 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site