Messages in this thread | | | From | Matteo Scordino <> | Subject | [PATCH v2 0/6] Elimo Impetus and Initium support - rework | Date | Fri, 30 Oct 2020 23:43:19 +0000 |
| |
Hi,
I applied the suggestions from the discussion that stemmed from V1, i.e.:
- using "sochip,s3", "allwinner,sun8i-v3" in the compatible string - add a patch to do the same for the Pine64 PineCube - alphabetic order in the dt-binding file - match the dt-binding file with the actual dts files
Matteo Scordino (6): dt-bindings: vendors: add Elimo Engineering vendor prefix ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM dt-bindings: arm: sunxi: add Elimo bindings ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC ARM: dts: sunxi: align pinecube compatible property to other S3 boards
.../devicetree/bindings/arm/sunxi.yaml | 13 +++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi | 51 +++++++++++++++++++ arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 28 ++++++++++ arch/arm/boot/dts/sun8i-s3-pinecube.dts | 2 +- arch/arm/boot/dts/sun8i-v3.dtsi | 5 ++ 7 files changed, 101 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
-- 2.20.1
| |