lkml.org 
[lkml]   [2020]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
Date
From: Terry Zhou <bjzhou@marvell.com>

There is an error in the current code that the XTAL MODE
pin was set to NB MPP1_31 which should be NB MPP1_9.
The latch register of NB MPP1_9 has different offset of 0x8.

Signed-off-by: Terry Zhou <bjzhou@marvell.com>
[pali: Fix pin name in commit message]
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 7ea8250406a6 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC")
Cc: stable@vger.kernel.org

---
This patch is present in Marvell SDK and also in Marvell's kernel fork:
https://github.com/MarvellEmbeddedProcessors/linux-marvell/commit/80d4cec4cef8282e5ac3aaf98ce3e68fb299a134

Konstantin Porotchkin wrote on Github that Gregory Clement was notified
about this patch, but as this patch is still not in mainline kernel I'm
sending it again for review.

In original commit message (only in commit message, not code) was
specified MPP9 pin on South Bridge, but correct is North Bridge.
---
drivers/clk/mvebu/armada-37xx-xtal.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mvebu/armada-37xx-xtal.c b/drivers/clk/mvebu/armada-37xx-xtal.c
index e9e306d4e9af..41271351cf1f 100644
--- a/drivers/clk/mvebu/armada-37xx-xtal.c
+++ b/drivers/clk/mvebu/armada-37xx-xtal.c
@@ -13,8 +13,8 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>

-#define NB_GPIO1_LATCH 0xC
-#define XTAL_MODE BIT(31)
+#define NB_GPIO1_LATCH 0x8
+#define XTAL_MODE BIT(9)

static int armada_3700_xtal_clock_probe(struct platform_device *pdev)
{
--
2.20.1
\
 
 \ /
  Last update: 2020-11-06 11:01    [W:0.097 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site