lkml.org 
[lkml]   [2020]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 17/17] x86/hyperv: handle IO-APIC when running as root
Date
Just like MSI/MSI-X, IO-APIC interrupts are remapped by Microsoft
Hypervisor when Linux runs as the root partition. Implement an IRQ chip
to handle mapping and unmapping of IO-APIC interrupts.

Use custom functions for mapping and unmapping ACPI GSIs. They will
issue Microsoft Hypervisor specific hypercalls on top of the native
routines.

Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
---
arch/x86/hyperv/hv_init.c | 13 +++
arch/x86/hyperv/irqdomain.c | 226 ++++++++++++++++++++++++++++++++++++
2 files changed, 239 insertions(+)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index a46b817b5b2a..2c2189832da7 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -267,10 +267,23 @@ static int hv_cpu_die(unsigned int cpu)
return 0;
}

+int hv_acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity);
+void hv_acpi_unregister_gsi(u32 gsi);
+
+extern int (*native_acpi_register_gsi)(struct device *dev, u32 gsi, int trigger, int polarity);
+extern void (*native_acpi_unregister_gsi)(u32 gsi);
+
static int __init hv_pci_init(void)
{
int gen2vm = efi_enabled(EFI_BOOT);

+ if (hv_root_partition) {
+ native_acpi_register_gsi = __acpi_register_gsi;
+ native_acpi_unregister_gsi = __acpi_unregister_gsi;
+ __acpi_register_gsi = hv_acpi_register_gsi;
+ __acpi_unregister_gsi = hv_acpi_unregister_gsi;
+ }
+
/*
* For Generation-2 VM, we exit from pci_arch_init() by returning 0.
* The purpose is to suppress the harmless warning:
diff --git a/arch/x86/hyperv/irqdomain.c b/arch/x86/hyperv/irqdomain.c
index 80109e3cbf8f..ae9a728589a4 100644
--- a/arch/x86/hyperv/irqdomain.c
+++ b/arch/x86/hyperv/irqdomain.c
@@ -9,6 +9,8 @@
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/mshyperv.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>

struct rid_data {
struct pci_dev *bridge;
@@ -328,3 +330,227 @@ struct irq_domain * __init hv_create_pci_msi_domain(void)
return d;
}

+/* Copied from io_apic.c */
+union entry_union {
+ struct { u32 w1, w2; };
+ struct IO_APIC_route_entry entry;
+};
+
+static int hv_unmap_ioapic_interrupt(int gsi)
+{
+ union hv_device_id device_id;
+ int ioapic, ioapic_id;
+ u8 ioapic_pin;
+ struct IO_APIC_route_entry ire;
+ union entry_union eu;
+ struct hv_interrupt_entry entry;
+
+ ioapic = mp_find_ioapic(gsi);
+ ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
+ ioapic_id = mpc_ioapic_id(ioapic);
+ ire = ioapic_read_entry(ioapic, ioapic_pin);
+
+ eu.entry = ire;
+
+ /*
+ * Polarity may have been set by us, but Hyper-V expects the exact same
+ * entry. See the mapping routine.
+ */
+ eu.entry.polarity = 0;
+
+ memset(&entry, 0, sizeof(entry));
+ entry.source = HV_INTERRUPT_SOURCE_IOAPIC;
+ entry.ioapic_rte.low_uint32 = eu.w1;
+ entry.ioapic_rte.high_uint32 = eu.w2;
+
+ device_id.as_uint64 = 0;
+ device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
+ device_id.ioapic.ioapic_id = (u8)ioapic_id;
+
+ return hv_unmap_interrupt(device_id.as_uint64, &entry) & HV_HYPERCALL_RESULT_MASK;
+}
+
+static int hv_map_ioapic_interrupt(int ioapic_id, int trigger, int vcpu, int vector,
+ struct hv_interrupt_entry *out_entry)
+{
+ unsigned long flags;
+ struct hv_input_map_device_interrupt *input;
+ struct hv_output_map_device_interrupt *output;
+ union hv_device_id device_id;
+ struct hv_device_interrupt_descriptor *intr_desc;
+ u16 status;
+
+ device_id.as_uint64 = 0;
+ device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
+ device_id.ioapic.ioapic_id = (u8)ioapic_id;
+
+ local_irq_save(flags);
+ input = *this_cpu_ptr(hyperv_pcpu_input_arg);
+ output = *this_cpu_ptr(hyperv_pcpu_output_arg);
+ memset(input, 0, sizeof(*input));
+ intr_desc = &input->interrupt_descriptor;
+ input->partition_id = hv_current_partition_id;
+ input->device_id = device_id.as_uint64;
+ intr_desc->interrupt_type = HV_X64_INTERRUPT_TYPE_FIXED;
+ intr_desc->target.vector = vector;
+ intr_desc->vector_count = 1;
+
+ if (trigger)
+ intr_desc->trigger_mode = HV_INTERRUPT_TRIGGER_MODE_LEVEL;
+ else
+ intr_desc->trigger_mode = HV_INTERRUPT_TRIGGER_MODE_EDGE;
+
+ __set_bit(vcpu, (unsigned long *)&intr_desc->target.vp_mask);
+
+ status = hv_do_rep_hypercall(HVCALL_MAP_DEVICE_INTERRUPT, 0, 0, input, output) &
+ HV_HYPERCALL_RESULT_MASK;
+ local_irq_restore(flags);
+
+ *out_entry = output->interrupt_entry;
+
+ return status;
+}
+
+static unsigned int hv_ioapic_startup_irq(struct irq_data *data)
+{
+ u16 status;
+ struct IO_APIC_route_entry ire;
+ u32 vector;
+ struct irq_cfg *cfg;
+ int ioapic;
+ u8 ioapic_pin;
+ int ioapic_id;
+ int gsi;
+ union entry_union eu;
+ struct cpumask *affinity;
+ int cpu, vcpu;
+ struct hv_interrupt_entry entry;
+ struct mp_chip_data *mp_data = data->chip_data;
+
+ gsi = data->irq;
+ cfg = irqd_cfg(data);
+ affinity = irq_data_get_effective_affinity_mask(data);
+ cpu = cpumask_first_and(affinity, cpu_online_mask);
+ vcpu = hv_cpu_number_to_vp_number(cpu);
+
+ vector = cfg->vector;
+
+ ioapic = mp_find_ioapic(gsi);
+ ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
+ ioapic_id = mpc_ioapic_id(ioapic);
+ ire = ioapic_read_entry(ioapic, ioapic_pin);
+
+ /*
+ * Always try unmapping. We do not have visibility into which whether
+ * an IO-APIC has been mapped or not. We can't use chip_data because it
+ * already points to mp_data.
+ *
+ * We don't use retarget interrupt hypercalls here because Hyper-V
+ * doens't allow root to change the vector or specify VPs outside of
+ * the set that is initially used during mapping.
+ */
+ status = hv_unmap_ioapic_interrupt(gsi);
+
+ if (!(status == HV_STATUS_SUCCESS || status == HV_STATUS_INVALID_PARAMETER)) {
+ pr_debug("%s: unexpected unmap status %d\n", __func__, status);
+ return -1;
+ }
+
+ status = hv_map_ioapic_interrupt(ioapic_id, ire.trigger, vcpu, vector, &entry);
+
+ if (status != HV_STATUS_SUCCESS) {
+ pr_err("%s: map hypercall failed, status %d\n", __func__, status);
+ return -1;
+ }
+
+ /* Update the entry in mp_chip_data. It is used in other places. */
+ mp_data->entry = *(struct IO_APIC_route_entry *)&entry.ioapic_rte;
+
+ /* Sync polarity -- Hyper-V's returned polarity is always 0... */
+ mp_data->entry.polarity = ire.polarity;
+
+ eu.w1 = entry.ioapic_rte.low_uint32;
+ eu.w2 = entry.ioapic_rte.high_uint32;
+ ioapic_write_entry(ioapic, ioapic_pin, eu.entry);
+
+ return 0;
+}
+
+static void hv_ioapic_mask_irq(struct irq_data *data)
+{
+ mask_ioapic_irq(data);
+}
+
+static void hv_ioapic_unmask_irq(struct irq_data *data)
+{
+ unmask_ioapic_irq(data);
+}
+
+static int hv_ioapic_set_affinity(struct irq_data *data,
+ const struct cpumask *mask, bool force)
+{
+ /*
+ * We only update the affinity mask here. Programming the hardware is
+ * done in irq_startup.
+ */
+ return ioapic_set_affinity(data, mask, force);
+}
+
+void hv_ioapic_ack_level(struct irq_data *irq_data)
+{
+ /*
+ * Per email exchange with Hyper-V team, all is needed is write to
+ * LAPIC's EOI register. They don't support directed EOI to IO-APIC.
+ * Hyper-V handles it for us.
+ */
+ apic_ack_irq(irq_data);
+}
+
+struct irq_chip hv_ioapic_chip __read_mostly = {
+ .name = "HV-IO-APIC",
+ .irq_startup = hv_ioapic_startup_irq,
+ .irq_mask = hv_ioapic_mask_irq,
+ .irq_unmask = hv_ioapic_unmask_irq,
+ .irq_ack = irq_chip_ack_parent,
+ .irq_eoi = hv_ioapic_ack_level,
+ .irq_set_affinity = hv_ioapic_set_affinity,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_get_irqchip_state = ioapic_irq_get_chip_state,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
+};
+
+
+int (*native_acpi_register_gsi)(struct device *dev, u32 gsi, int trigger, int polarity);
+void (*native_acpi_unregister_gsi)(u32 gsi);
+
+int hv_acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+ int irq = gsi;
+
+#ifdef CONFIG_X86_IO_APIC
+ irq = native_acpi_register_gsi(dev, gsi, trigger, polarity);
+ if (irq < 0) {
+ pr_err("native_acpi_register_gsi failed %d\n", irq);
+ return irq;
+ }
+
+ if (trigger) {
+ irq_set_status_flags(irq, IRQ_LEVEL);
+ irq_set_chip_and_handler_name(irq, &hv_ioapic_chip,
+ handle_fasteoi_irq, "ioapic-fasteoi");
+ } else {
+ irq_clear_status_flags(irq, IRQ_LEVEL);
+ irq_set_chip_and_handler_name(irq, &hv_ioapic_chip,
+ handle_edge_irq, "ioapic-edge");
+ }
+#endif
+ return irq;
+}
+
+void hv_acpi_unregister_gsi(u32 gsi)
+{
+#ifdef CONFIG_X86_IO_APIC
+ (void)hv_unmap_ioapic_interrupt(gsi);
+ native_acpi_unregister_gsi(gsi);
+#endif
+}
--
2.20.1
\
 
 \ /
  Last update: 2020-11-05 17:59    [W:0.299 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site