lkml.org 
[lkml]   [2020]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/15] drivers: usb: misc: update to use usb_control_msg_{send|recv}()
Date

The new usb_control_msg_{send|recv}() API provides an improved way of
using usb_control_msg(). Using this, short reads/writes are considered
as errors, data can be used off the stack, and the need for the calling
function to create a raw usb pipe is eliminated.
This patch series aims to update existing instances of usb_control_msg()
in drivers/usb/misc to usb_control_msg_{send|recv}() appropriately, and
also update the return value checking mechanisms in place (if any), as
necessary so nothing breaks.

I was however unable to update one instance of usb_control_msg() in
drivers/usb/misc/apple-mfi-fastcharge.c.

The return value checking mechanism present here, is as follows.
if (retval) {
dev_dbg(&mfi->udev->dev, "retval = %d\n", retval);
return retval;
}

mfi->charge_type = val->intval;

return 0;

This implies that mfi->charge_type = val->intval only when number of
bytes transferred = 0, and the return value is directly returned
otherwise. Since the new API doesn't return the number of bytes
transferred, I wasn't quite sure how this instance could be updated.
In case this check is logically incorrect, a patch with a fix
can be sent in as well.


Anant Thazhemadam (15):
usb: misc: appledisplay: update to use the
usb_control_msg_{send|recv}() API
usb: misc: cypress_cy7c63: update to use usb_control_msg_recv()
usb: misc: cytherm: update to use usb_control_msg_recv()
usb: misc: ehset: update to use the usb_control_msg_{send|recv}() API
usb: misc: emi26: update to use usb_control_msg_send()
usb: misc: emi62: update to use usb_control_msg_send()
usb: misc: ezusb: update to use usb_control_msg_send()
usb: misc: idmouse: update to use usb_control_msg_send()
usb: misc: iowarrior: update to use the usb_control_msg_{send|recv}()
API
usb: misc: isight_firmware: update to use usb_control_msg_send()
usb: misc: ldusb: update to use usb_control_msg_send()
usb: misc: lvstest: update to use the usb_control_msg_{send|recv}()
API
usb: misc: trancevibrator: update to use usb_control_msg_send()
usb: misc: usbsevseg: update to use usb_control_msg_send()
usb: misc: usbtest: update to use the usb_control_msg_{send|recv}()
API

drivers/usb/misc/appledisplay.c | 46 ++++++++------------
drivers/usb/misc/cypress_cy7c63.c | 10 ++---
drivers/usb/misc/cytherm.c | 42 +++++++++---------
drivers/usb/misc/ehset.c | 70 +++++++++++++-----------------
drivers/usb/misc/emi26.c | 14 +-----
drivers/usb/misc/emi62.c | 14 +-----
drivers/usb/misc/ezusb.c | 16 +------
drivers/usb/misc/idmouse.c | 5 ++-
drivers/usb/misc/iowarrior.c | 34 +++++++--------
drivers/usb/misc/isight_firmware.c | 22 +++++-----
drivers/usb/misc/ldusb.c | 8 ++--
drivers/usb/misc/lvstest.c | 30 ++++++-------
drivers/usb/misc/trancevibrator.c | 6 +--
drivers/usb/misc/usbsevseg.c | 52 +++++++---------------
drivers/usb/misc/usbtest.c | 63 +++++++++++++--------------
15 files changed, 180 insertions(+), 252 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2020-11-29 17:08    [W:0.113 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site