lkml.org 
[lkml]   [2020]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 04/15] usb: misc: ehset: update to use the usb_control_msg_{send|recv}() API
Date

>
> The newer usb_control_msg_{send|recv}() API are an improvement on the
> existing usb_control_msg() as it ensures that a short read/write is treated as
> an error, data can be used off the stack, and raw usb pipes need not be created
> in the calling functions.
> For this reason, instances of usb_control_msg() have been replaced with
> usb_control_msg_{recv|send}() appropriately.
>
> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>

Reviewed-by: Peter Chen <peter.chen@nxp.com>

Peter

> ---
> drivers/usb/misc/ehset.c | 70 ++++++++++++++++++----------------------
> 1 file changed, 31 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c index
> 2752e1f4f4d0..068f4fae2965 100644
> --- a/drivers/usb/misc/ehset.c
> +++ b/drivers/usb/misc/ehset.c
> @@ -30,48 +30,42 @@ static int ehset_probe(struct usb_interface *intf,
>
> switch (test_pid) {
> case TEST_SE0_NAK_PID:
> - ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> - USB_REQ_SET_FEATURE, USB_RT_PORT,
> - USB_PORT_FEAT_TEST,
> - (USB_TEST_SE0_NAK << 8) | portnum,
> - NULL, 0, 1000);
> + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> + USB_RT_PORT, USB_PORT_FEAT_TEST,
> + (USB_TEST_SE0_NAK << 8) | portnum,
> + NULL, 0, 1000, GFP_KERNEL);
> break;
> case TEST_J_PID:
> - ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> - USB_REQ_SET_FEATURE, USB_RT_PORT,
> - USB_PORT_FEAT_TEST,
> - (USB_TEST_J << 8) | portnum,
> - NULL, 0, 1000);
> + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> + USB_RT_PORT, USB_PORT_FEAT_TEST,
> + (USB_TEST_J << 8) | portnum, NULL, 0,
> + 1000, GFP_KERNEL);
> break;
> case TEST_K_PID:
> - ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> - USB_REQ_SET_FEATURE, USB_RT_PORT,
> - USB_PORT_FEAT_TEST,
> - (USB_TEST_K << 8) | portnum,
> - NULL, 0, 1000);
> + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> + USB_RT_PORT, USB_PORT_FEAT_TEST,
> + (USB_TEST_K << 8) | portnum, NULL, 0,
> + 1000, GFP_KERNEL);
> break;
> case TEST_PACKET_PID:
> - ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> - USB_REQ_SET_FEATURE, USB_RT_PORT,
> - USB_PORT_FEAT_TEST,
> - (USB_TEST_PACKET << 8) | portnum,
> - NULL, 0, 1000);
> + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> + USB_RT_PORT, USB_PORT_FEAT_TEST,
> + (USB_TEST_PACKET << 8) | portnum,
> + NULL, 0, 1000, GFP_KERNEL);
> break;
> case TEST_HS_HOST_PORT_SUSPEND_RESUME:
> /* Test: wait for 15secs -> suspend -> 15secs delay -> resume */
> msleep(15 * 1000);
> - ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> - USB_REQ_SET_FEATURE, USB_RT_PORT,
> - USB_PORT_FEAT_SUSPEND, portnum,
> - NULL, 0, 1000);
> + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> + USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
> + portnum, NULL, 0, 1000, GFP_KERNEL);
> if (ret < 0)
> break;
>
> msleep(15 * 1000);
> - ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> - USB_REQ_CLEAR_FEATURE, USB_RT_PORT,
> - USB_PORT_FEAT_SUSPEND, portnum,
> - NULL, 0, 1000);
> + ret = usb_control_msg_send(hub_udev, 0,
> USB_REQ_CLEAR_FEATURE,
> + USB_RT_PORT, USB_PORT_FEAT_SUSPEND,
> + portnum, NULL, 0, 1000, GFP_KERNEL);
> break;
> case TEST_SINGLE_STEP_GET_DEV_DESC:
> /* Test: wait for 15secs -> GetDescriptor request */ @@ -80,11
> +74,10 @@ static int ehset_probe(struct usb_interface *intf,
> if (!buf)
> return -ENOMEM;
>
> - ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
> - USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
> - USB_DT_DEVICE << 8, 0,
> - buf, USB_DT_DEVICE_SIZE,
> - USB_CTRL_GET_TIMEOUT);
> + ret = usb_control_msg_recv(dev, 0, USB_REQ_GET_DESCRIPTOR,
> + USB_DIR_IN, USB_DT_DEVICE << 8, 0,
> + buf, USB_DT_DEVICE_SIZE,
> + USB_CTRL_GET_TIMEOUT, GFP_KERNEL);
> kfree(buf);
> break;
> case TEST_SINGLE_STEP_SET_FEATURE:
> @@ -100,11 +93,10 @@ static int ehset_probe(struct usb_interface *intf,
> break;
> }
>
> - ret = usb_control_msg(hub_udev, usb_sndctrlpipe(hub_udev, 0),
> - USB_REQ_SET_FEATURE, USB_RT_PORT,
> - USB_PORT_FEAT_TEST,
> - (6 << 8) | portnum,
> - NULL, 0, 60 * 1000);
> + ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
> + USB_RT_PORT, USB_PORT_FEAT_TEST,
> + (6 << 8) | portnum, NULL, 0,
> + 60 * 1000, GFP_KERNEL);
>
> break;
> default:
> @@ -112,7 +104,7 @@ static int ehset_probe(struct usb_interface *intf,
> __func__, test_pid);
> }
>
> - return (ret < 0) ? ret : 0;
> + return ret;
> }
>
> static void ehset_disconnect(struct usb_interface *intf)
> --
> 2.25.1

\
 
 \ /
  Last update: 2020-12-07 03:27    [W:0.099 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site