lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 17/24] kvm: arm64: Add CPU entry point in nVHE hyp
Date
When nVHE hyp starts interception host's PSCI CPU_ON SMCs, it will need
to install KVM on the newly booted CPU before returning to the host. Add
an entry point which expects the same kvm_nvhe_init_params struct as the
__kvm_hyp_init HVC in the CPU_ON context argument (x0).

The entry point initializes EL2 state with the same init_el2_state macro
used by the kernel's entry point. It then initializes KVM using the same
helper function used in the __kvm_hyp_init HVC.

When done, the entry point branches to a function provided in the init
params.

Signed-off-by: David Brazdil <dbrazdil@google.com>
---
arch/arm64/include/asm/kvm_asm.h | 1 +
arch/arm64/kernel/asm-offsets.c | 1 +
arch/arm64/kvm/hyp/nvhe/hyp-init.S | 32 ++++++++++++++++++++++++++++++
3 files changed, 34 insertions(+)

diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 01904e88cead..109867fb76f6 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -154,6 +154,7 @@ struct kvm_nvhe_init_params {
unsigned long tpidr_el2;
unsigned long vector_hyp_va;
unsigned long stack_hyp_va;
+ unsigned long entry_hyp_va;
phys_addr_t pgd_pa;
};

diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 4435ad8be938..9752100bf01f 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -113,6 +113,7 @@ int main(void)
DEFINE(NVHE_INIT_TPIDR_EL2, offsetof(struct kvm_nvhe_init_params, tpidr_el2));
DEFINE(NVHE_INIT_VECTOR_HYP_VA, offsetof(struct kvm_nvhe_init_params, vector_hyp_va));
DEFINE(NVHE_INIT_STACK_HYP_VA, offsetof(struct kvm_nvhe_init_params, stack_hyp_va));
+ DEFINE(NVHE_INIT_ENTRY_HYP_VA, offsetof(struct kvm_nvhe_init_params, entry_hyp_va));
DEFINE(NVHE_INIT_PGD_PA, offsetof(struct kvm_nvhe_init_params, pgd_pa));
#endif
#ifdef CONFIG_CPU_PM
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
index d4a71ac34254..6d8202d2bdfb 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -9,6 +9,7 @@

#include <asm/alternative.h>
#include <asm/assembler.h>
+#include <asm/el2_setup.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmu.h>
@@ -159,6 +160,37 @@ alternative_else_nop_endif
ret
SYM_CODE_END(___kvm_hyp_init)

+SYM_CODE_START(__kvm_hyp_cpu_entry)
+ msr SPsel, #1 // We want to use SP_EL{1,2}
+
+ /* Check that the core was booted in EL2. */
+ mrs x1, CurrentEL
+ cmp x1, #CurrentEL_EL2
+ b.eq 2f
+
+ /* The core booted in EL1. KVM cannot be initialized on it. */
+1: wfe
+ wfi
+ b 1b
+
+ /* Initialize EL2 CPU state to sane values. */
+2: mov x29, x0
+ init_el2_state nvhe
+ mov x0, x29
+
+ /*
+ * Load hyp VA of C entry function. Must do so before switching on the
+ * MMU because the struct pointer is PA and not identity-mapped in hyp.
+ */
+ ldr x29, [x0, #NVHE_INIT_ENTRY_HYP_VA]
+
+ /* Enable MMU, set vectors and stack. */
+ bl ___kvm_hyp_init
+
+ /* Leave idmap. */
+ br x29
+SYM_CODE_END(__kvm_hyp_cpu_entry)
+
SYM_CODE_START(__kvm_handle_stub_hvc)
cmp x0, #HVC_SOFT_RESTART
b.ne 1f
--
2.29.2.299.gdc1121823c-goog
\
 
 \ /
  Last update: 2020-11-16 21:46    [W:0.171 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site