lkml.org 
[lkml]   [2020]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 23/24] kvm: arm64: Trap host SMCs in protected mode.
On Mon, 16 Nov 2020 20:43:17 +0000,
David Brazdil <dbrazdil@google.com> wrote:
>
> While protected nVHE KVM is installed, start trapping all host SMCs.
> By default, these are simply forwarded to EL3, but PSCI SMCs are
> validated first.
>
> Create new constant HCR_HOST_NVHE_PROTECTED_FLAGS with the new set of HCR
> flags to use while the nVHE vector is installed when the kernel was
> booted with the protected flag enabled. Switch back to the default HCR
> flags when switching back to the stub vector.
>
> Signed-off-by: David Brazdil <dbrazdil@google.com>
> ---
> arch/arm64/include/asm/kvm_arm.h | 1 +
> arch/arm64/kvm/hyp/nvhe/hyp-init.S | 12 ++++++++++++
> arch/arm64/kvm/hyp/nvhe/switch.c | 5 ++++-
> 3 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
> index 64ce29378467..4e90c2debf70 100644
> --- a/arch/arm64/include/asm/kvm_arm.h
> +++ b/arch/arm64/include/asm/kvm_arm.h
> @@ -80,6 +80,7 @@
> HCR_FMO | HCR_IMO | HCR_PTW )
> #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
> #define HCR_HOST_NVHE_FLAGS (HCR_RW | HCR_API | HCR_APK | HCR_ATA)
> +#define HCR_HOST_NVHE_PROTECTED_FLAGS (HCR_HOST_NVHE_FLAGS | HCR_TSC)
> #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
>
> /* TCR_EL2 Registers bits */
> diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
> index 6d8202d2bdfb..8f3602f320ac 100644
> --- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S
> +++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
> @@ -88,6 +88,12 @@ SYM_CODE_END(__kvm_hyp_init)
> * x0: struct kvm_nvhe_init_params PA
> */
> SYM_CODE_START(___kvm_hyp_init)
> +alternative_if ARM64_PROTECTED_KVM
> + mov_q x1, HCR_HOST_NVHE_PROTECTED_FLAGS
> + msr hcr_el2, x1
> + isb

Why the ISB? For HCR_TSC to have any effect, you'll have to go via an
ERET to EL1 first, which will have the required synchronisation effect.

> +alternative_else_nop_endif
> +
> ldr x1, [x0, #NVHE_INIT_TPIDR_EL2]
> msr tpidr_el2, x1
>
> @@ -224,6 +230,12 @@ reset:
> msr sctlr_el2, x5
> isb
>
> +alternative_if ARM64_PROTECTED_KVM
> + mov_q x5, HCR_HOST_NVHE_FLAGS
> + msr hcr_el2, x5
> + isb

Same thing here, I believe.

> +alternative_else_nop_endif
> +
> /* Install stub vectors */
> adr_l x5, __hyp_stub_vectors
> msr vbar_el2, x5
> diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c
> index 8ae8160bc93a..e1f8e0797144 100644
> --- a/arch/arm64/kvm/hyp/nvhe/switch.c
> +++ b/arch/arm64/kvm/hyp/nvhe/switch.c
> @@ -96,7 +96,10 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
> mdcr_el2 |= MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT;
>
> write_sysreg(mdcr_el2, mdcr_el2);
> - write_sysreg(HCR_HOST_NVHE_FLAGS, hcr_el2);
> + if (is_protected_kvm_enabled())
> + write_sysreg(HCR_HOST_NVHE_PROTECTED_FLAGS, hcr_el2);
> + else
> + write_sysreg(HCR_HOST_NVHE_FLAGS, hcr_el2);
> write_sysreg(CPTR_EL2_DEFAULT, cptr_el2);
> write_sysreg(__kvm_hyp_host_vector, vbar_el2);
> }
> --
> 2.29.2.299.gdc1121823c-goog
>
>

Thanks,

M.

--
Without deviation from the norm, progress is not possible.

\
 
 \ /
  Last update: 2020-11-23 18:40    [W:0.713 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site