lkml.org 
[lkml]   [2020]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 15/24] kvm: arm64: Extract parts of el2_setup into a macro
On Mon, 16 Nov 2020 20:43:09 +0000,
David Brazdil <dbrazdil@google.com> wrote:
>
> When the a CPU is booted in EL2, the kernel checks for VHE support and
> initializes the CPU core accordingly. For nVHE it also installs the stub
> vectors and drops down to EL1.
>
> Once KVM gains the ability to boot cores without going through the
> kernel entry point, it will need to initialize the CPU the same way.
> Extract the relevant bits of el2_setup into an init_el2_state macro
> with an argument specifying whether to initialize for VHE or nVHE.
>
> No functional change. Size of el2_setup increased by 148 bytes due
> to duplication.
>
> Signed-off-by: David Brazdil <dbrazdil@google.com>
> ---
> arch/arm64/include/asm/el2_setup.h | 185 +++++++++++++++++++++++++++++
> arch/arm64/kernel/head.S | 144 +++-------------------
> 2 files changed, 201 insertions(+), 128 deletions(-)
> create mode 100644 arch/arm64/include/asm/el2_setup.h
>
> diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
> new file mode 100644
> index 000000000000..e5026e0aa878
> --- /dev/null
> +++ b/arch/arm64/include/asm/el2_setup.h
> @@ -0,0 +1,185 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2012,2013 - ARM Ltd
> + * Author: Marc Zyngier <marc.zyngier@arm.com>
> + */
> +
> +#ifndef __ARM_KVM_INIT_H__
> +#define __ARM_KVM_INIT_H__
> +
> +#ifndef __ASSEMBLY__
> +#error Assembly-only header
> +#endif
> +
> +#ifdef CONFIG_ARM_GIC_V3
> +#include <linux/irqchip/arm-gic-v3.h>
> +#endif
> +
> +#include <asm/kvm_arm.h>
> +#include <asm/ptrace.h>
> +#include <asm/sysreg.h>
> +
> +.macro __init_el2_sctlr
> + mov_q x0, (SCTLR_EL2_RES1 | ENDIAN_SET_EL2)
> + msr sctlr_el2, x0
> + isb
> +.endm
> +
> +/*
> + * Allow Non-secure EL1 and EL0 to access physical timer and counter.
> + * This is not necessary for VHE, since the host kernel runs in EL2,
> + * and EL0 accesses are configured in the later stage of boot process.
> + * Note that when HCR_EL2.E2H == 1, CNTHCTL_EL2 has the same bit layout
> + * as CNTKCTL_EL1, and CNTKCTL_EL1 accessing instructions are redefined
> + * to access CNTHCTL_EL2. This allows the kernel designed to run at EL1
> + * to transparently mess with the EL0 bits via CNTKCTL_EL1 access in
> + * EL2.
> + */
> +.macro __init_el2_timers mode
> +.ifeqs "\mode", "nvhe"
> + mrs x0, cnthctl_el2
> + orr x0, x0, #3 // Enable EL1 physical timers
> + msr cnthctl_el2, x0
> +.endif
> + msr cntvoff_el2, xzr // Clear virtual offset
> +.endm
> +
> +.macro __init_el2_debug mode
> + mrs x1, id_aa64dfr0_el1
> + sbfx x0, x1, #ID_AA64DFR0_PMUVER_SHIFT, #4
> + cmp x0, #1
> + b.lt 1f // Skip if no PMU present
> + mrs x0, pmcr_el0 // Disable debug access traps
> + ubfx x0, x0, #11, #5 // to EL2 and allow access to
> +1:
> + csel x2, xzr, x0, lt // all PMU counters from EL1
> +
> + /* Statistical profiling */
> + ubfx x0, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4
> + cbz x0, 3f // Skip if SPE not present
> +
> +.ifeqs "\mode", "nvhe"
> + mrs_s x0, SYS_PMBIDR_EL1 // If SPE available at EL2,
> + and x0, x0, #(1 << SYS_PMBIDR_EL1_P_SHIFT)
> + cbnz x0, 2f // then permit sampling of physical
> + mov x0, #(1 << SYS_PMSCR_EL2_PCT_SHIFT | \
> + 1 << SYS_PMSCR_EL2_PA_SHIFT)
> + msr_s SYS_PMSCR_EL2, x0 // addresses and physical counter
> +2:
> + mov x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
> + orr x2, x2, x0 // If we don't have VHE, then
> + // use EL1&0 translation.
> +.else
> + orr x2, x2, #MDCR_EL2_TPMS // For VHE, use EL2 translation
> + // and disable access from EL1
> +.endif
> +
> +3:
> + msr mdcr_el2, x2 // Configure debug traps
> +.endm
> +
> +/* LORegions */
> +.macro __init_el2_lor
> + mrs x1, id_aa64mmfr1_el1
> + ubfx x0, x1, #ID_AA64MMFR1_LOR_SHIFT, 4
> + cbz x0, 1f
> + msr_s SYS_LORC_EL1, xzr
> +1:
> +.endm
> +
> +/* Stage-2 translation */
> +.macro __init_el2_stage2
> + msr vttbr_el2, xzr
> +.endm
> +
> +/* GICv3 system register access */
> +#ifdef CONFIG_ARM_GIC_V3
nit: this #ifdef isn't relevant anymore and can be dropped throughout
the file.

> +.macro __init_el2_gicv3
> + mrs x0, id_aa64pfr0_el1
> + ubfx x0, x0, #ID_AA64PFR0_GIC_SHIFT, #4
> + cbz x0, 1f
> +
> + mrs_s x0, SYS_ICC_SRE_EL2
> + orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1
> + orr x0, x0, #ICC_SRE_EL2_ENABLE // Set ICC_SRE_EL2.Enable==1
> + msr_s SYS_ICC_SRE_EL2, x0
> + isb // Make sure SRE is now set
> + mrs_s x0, SYS_ICC_SRE_EL2 // Read SRE back,
> + tbz x0, #0, 1f // and check that it sticks
> + msr_s SYS_ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults
> +1:
> +.endm
> +#endif
> +
> +/* Virtual CPU ID registers */
> +.macro __init_el2_nvhe_idregs
> + mrs x0, midr_el1
> + mrs x1, mpidr_el1
> + msr vpidr_el2, x0
> + msr vmpidr_el2, x1
> +.endm
> +
> +/* Coprocessor traps */
> +.macro __init_el2_nvhe_cptr
> + mov x0, #0x33ff
> + msr cptr_el2, x0 // Disable copro. traps to EL2
> +.endm
> +
> +/* SVE register access */
> +.macro __init_el2_nvhe_sve
> + mrs x1, id_aa64pfr0_el1
> + ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
> + cbz x1, 1f
> +
> + bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps
> + msr cptr_el2, x0 // Disable copro. traps to EL2
> + isb
> + mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
> + msr_s SYS_ZCR_EL2, x1 // length for EL1.
> +1:
> +.endm
> +
> +.macro __init_el2_nvhe_spsr

nit: this would be better named as "prepare_eret".

> + mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
> + PSR_MODE_EL1h)
> + msr spsr_el2, x0
> +.endm
> +
> +.macro init_el2_state mode
> +
> +.ifnes "\mode", "vhe"
> +.ifnes "\mode", "nvhe"
> +.error "Invalid 'mode' argument"
> +.endif
> +.endif
> +
> + __init_el2_sctlr
> + __init_el2_timers \mode
> + __init_el2_debug \mode
> + __init_el2_lor
> + __init_el2_stage2
> +
> +#ifdef CONFIG_ARM_GIC_V3
> + __init_el2_gicv3
> +#endif
> +
> +#ifdef CONFIG_COMPAT

I also think we can drop this one, as HSTR_EL2 is always defined, even
when AArch32 isn't present in the system.

> + msr hstr_el2, xzr // Disable CP15 traps to EL2
> +#endif
> +
> + /*
> + * When VHE is not in use, early init of EL2 needs to be done here.
> + * When VHE _is_ in use, EL1 will not be used in the host and
> + * requires no configuration, and all non-hyp-specific EL2 setup
> + * will be done via the _EL1 system register aliases in __cpu_setup.
> + */
> +.ifeqs "\mode", "nvhe"
> + __init_el2_nvhe_idregs
> + __init_el2_nvhe_cptr
> + __init_el2_nvhe_sve
> + __init_el2_nvhe_spsr
> +.endif
> +
> +.endm

One thing that is missing here is a description of the registers that
are clobbered. It was easy to spot before (everything was in the same
file), and a bit harder now.

> +
> +#endif /* __ARM_KVM_INIT_H__ */
> diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> index d8d9caf02834..da913ce9e89f 100644
> --- a/arch/arm64/kernel/head.S
> +++ b/arch/arm64/kernel/head.S
> @@ -11,7 +11,6 @@
>
> #include <linux/linkage.h>
> #include <linux/init.h>
> -#include <linux/irqchip/arm-gic-v3.h>
> #include <linux/pgtable.h>
>
> #include <asm/asm_pointer_auth.h>
> @@ -21,6 +20,7 @@
> #include <asm/asm-offsets.h>
> #include <asm/cache.h>
> #include <asm/cputype.h>
> +#include <asm/el2_setup.h>
> #include <asm/elf.h>
> #include <asm/image.h>
> #include <asm/kernel-pgtable.h>
> @@ -493,159 +493,47 @@ SYM_FUNC_START(el2_setup)
> mrs x0, CurrentEL
> cmp x0, #CurrentEL_EL2
> b.eq 1f
> +
> mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1)
> msr sctlr_el1, x0
> mov w0, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1
> isb
> ret
>
> -1: mov_q x0, (SCTLR_EL2_RES1 | ENDIAN_SET_EL2)
> - msr sctlr_el2, x0
> -
> +1:
> #ifdef CONFIG_ARM64_VHE
> /*
> - * Check for VHE being present. For the rest of the EL2 setup,
> - * x2 being non-zero indicates that we do have VHE, and that the
> - * kernel is intended to run at EL2.
> + * Check for VHE being present. x2 being non-zero indicates that we
> + * do have VHE, and that the kernel is intended to run at EL2.
> */
> mrs x2, id_aa64mmfr1_el1
> ubfx x2, x2, #ID_AA64MMFR1_VHE_SHIFT, #4
> -#else
> - mov x2, xzr
> -#endif
> + cbz x2, el2_setup_nvhe
>
> - /* Hyp configuration. */
> - mov_q x0, HCR_HOST_NVHE_FLAGS
> - cbz x2, set_hcr
> mov_q x0, HCR_HOST_VHE_FLAGS
> -set_hcr:
> msr hcr_el2, x0
> isb
>
> - /*
> - * Allow Non-secure EL1 and EL0 to access physical timer and counter.
> - * This is not necessary for VHE, since the host kernel runs in EL2,
> - * and EL0 accesses are configured in the later stage of boot process.
> - * Note that when HCR_EL2.E2H == 1, CNTHCTL_EL2 has the same bit layout
> - * as CNTKCTL_EL1, and CNTKCTL_EL1 accessing instructions are redefined
> - * to access CNTHCTL_EL2. This allows the kernel designed to run at EL1
> - * to transparently mess with the EL0 bits via CNTKCTL_EL1 access in
> - * EL2.
> - */
> - cbnz x2, 1f
> - mrs x0, cnthctl_el2
> - orr x0, x0, #3 // Enable EL1 physical timers
> - msr cnthctl_el2, x0
> -1:
> - msr cntvoff_el2, xzr // Clear virtual offset
> -
> -#ifdef CONFIG_ARM_GIC_V3
> - /* GICv3 system register access */
> - mrs x0, id_aa64pfr0_el1
> - ubfx x0, x0, #ID_AA64PFR0_GIC_SHIFT, #4
> - cbz x0, 3f
> -
> - mrs_s x0, SYS_ICC_SRE_EL2
> - orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1
> - orr x0, x0, #ICC_SRE_EL2_ENABLE // Set ICC_SRE_EL2.Enable==1
> - msr_s SYS_ICC_SRE_EL2, x0
> - isb // Make sure SRE is now set
> - mrs_s x0, SYS_ICC_SRE_EL2 // Read SRE back,
> - tbz x0, #0, 3f // and check that it sticks
> - msr_s SYS_ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults
> -
> -3:
> -#endif
> -
> - /* Populate ID registers. */
> - mrs x0, midr_el1
> - mrs x1, mpidr_el1
> - msr vpidr_el2, x0
> - msr vmpidr_el2, x1
> -
> -#ifdef CONFIG_COMPAT
> - msr hstr_el2, xzr // Disable CP15 traps to EL2
> -#endif
> -
> - /* EL2 debug */
> - mrs x1, id_aa64dfr0_el1
> - sbfx x0, x1, #ID_AA64DFR0_PMUVER_SHIFT, #4
> - cmp x0, #1
> - b.lt 4f // Skip if no PMU present
> - mrs x0, pmcr_el0 // Disable debug access traps
> - ubfx x0, x0, #11, #5 // to EL2 and allow access to
> -4:
> - csel x3, xzr, x0, lt // all PMU counters from EL1
> -
> - /* Statistical profiling */
> - ubfx x0, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4
> - cbz x0, 7f // Skip if SPE not present
> - cbnz x2, 6f // VHE?
> - mrs_s x4, SYS_PMBIDR_EL1 // If SPE available at EL2,
> - and x4, x4, #(1 << SYS_PMBIDR_EL1_P_SHIFT)
> - cbnz x4, 5f // then permit sampling of physical
> - mov x4, #(1 << SYS_PMSCR_EL2_PCT_SHIFT | \
> - 1 << SYS_PMSCR_EL2_PA_SHIFT)
> - msr_s SYS_PMSCR_EL2, x4 // addresses and physical counter
> -5:
> - mov x1, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
> - orr x3, x3, x1 // If we don't have VHE, then
> - b 7f // use EL1&0 translation.
> -6: // For VHE, use EL2 translation
> - orr x3, x3, #MDCR_EL2_TPMS // and disable access from EL1
> -7:
> - msr mdcr_el2, x3 // Configure debug traps
> -
> - /* LORegions */
> - mrs x1, id_aa64mmfr1_el1
> - ubfx x0, x1, #ID_AA64MMFR1_LOR_SHIFT, 4
> - cbz x0, 1f
> - msr_s SYS_LORC_EL1, xzr
> -1:
> -
> - /* Stage-2 translation */
> - msr vttbr_el2, xzr
> -
> - cbz x2, install_el2_stub
> + init_el2_state vhe
>
> mov w0, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2
> isb
> ret
> +#endif
>
> -SYM_INNER_LABEL(install_el2_stub, SYM_L_LOCAL)
> - /*
> - * When VHE is not in use, early init of EL2 and EL1 needs to be
> - * done here.
> - * When VHE _is_ in use, EL1 will not be used in the host and
> - * requires no configuration, and all non-hyp-specific EL2 setup
> - * will be done via the _EL1 system register aliases in __cpu_setup.
> - */
> - mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1)
> - msr sctlr_el1, x0
> -
> - /* Coprocessor traps. */
> - mov x0, #0x33ff
> - msr cptr_el2, x0 // Disable copro. traps to EL2
> -
> - /* SVE register access */
> - mrs x1, id_aa64pfr0_el1
> - ubfx x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
> - cbz x1, 7f
> -
> - bic x0, x0, #CPTR_EL2_TZ // Also disable SVE traps
> - msr cptr_el2, x0 // Disable copro. traps to EL2
> +SYM_INNER_LABEL(el2_setup_nvhe, SYM_L_LOCAL)
> + mov_q x0, HCR_HOST_NVHE_FLAGS
> + msr hcr_el2, x0
> isb
> - mov x1, #ZCR_ELx_LEN_MASK // SVE: Enable full vector
> - msr_s SYS_ZCR_EL2, x1 // length for EL1.
> +
> + init_el2_state nvhe
>
> /* Hypervisor stub */
> -7: adr_l x0, __hyp_stub_vectors
> + adr_l x0, __hyp_stub_vectors
> msr vbar_el2, x0
>
> - /* spsr */
> - mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
> - PSR_MODE_EL1h)
> - msr spsr_el2, x0
> + mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1)
> + msr sctlr_el1, x0
> msr elr_el2, lr
> mov w0, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2
> eret
> --
> 2.29.2.299.gdc1121823c-goog
>
>

It looks much better now, thanks a lot for going through the pain of
splitting everything.

M.

--
Without deviation from the norm, progress is not possible.

\
 
 \ /
  Last update: 2020-11-23 16:27    [W:0.487 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site