lkml.org 
[lkml]   [2020]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] leds: lm3697: Fix out-of-bound access
Signed-off-by: Ultracoolguy <ultracoolguy@tutanota.com>
Hi, all. This is a patch fixing an out-of-bounds error due to lm3697_init expecting the device tree to use both control banks.  This fixes it by adding a new variable that will hold the number of used banks.

Panic caused by this bug:

<1>[    3.059763] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001e5
<1>[    3.059779] Mem abort info:
<1>[    3.059788]   ESR = 0x96000004
<1>[    3.059799]   EC = 0x25: DABT (current EL), IL = 32 bits
<1>[    3.059807]   SET = 0, FnV = 0
<1>[    3.059816]   EA = 0, S1PTW = 0
<1>[    3.059824] Data abort info:
<1>[    3.059833]   ISV = 0, ISS = 0x00000004
<1>[    3.059841]   CM = 0, WnR = 0
<1>[    3.059850] [00000000000001e5] user address but active_mm is swapper
<0>[    3.059864] Internal error: Oops: 96000004 [#1] PREEMPT SMP
<7>[    3.059874] Modules linked in:
<7>[    3.059893] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G        W         5.9.0-rc7-postmarketos-qcom-msm8953 #71
<7>[    3.059903] Hardware name: Motorola G7 Power (ocean) (DT)
<7>[    3.059916] pstate: a0000005 (NzCv daif -PAN -UAO BTYPE=--)
<7>[    3.059937] pc : regmap_write+0x1c/0x78
<7>[    3.059952] lr : ti_lmu_common_set_ramp+0x60/0x70
<7>[    3.059961] sp : ffff800010043ad0
<7>[    3.059970] x29: ffff800010043ad0 x28: ffff0000b98510d0
<7>[    3.059982] x27: ffff0000b9851288 x26: ffff800010906cc0
<7>[    3.059995] x25: ffff8000108e5d85 x24: 0000000000000001
<7>[    3.060008] x23: 0000000000000000 x22: ffff0000b9851080
<7>[    3.060020] x21: 0000000000000001 x20: 000000000000000f
<7>[    3.060032] x19: 0000000000000001 x18: 0000000000000000
<7>[    3.060045] x17: 00000000f2f3902a x16: 00000000ee02cbfb
<7>[    3.060058] x15: 000000000000000a x14: 0000000000000307
<7>[    3.060070] x13: ffffffffffffffff x12: ffffffffffffffff
<7>[    3.060083] x11: 0000000000000000 x10: 0000000000000950
<7>[    3.060095] x9 : ffff8000105864e4 x8 : ffff0000b2f089b0
<7>[    3.060108] x7 : 0000000000000004 x6 : 000000000000033c
<7>[    3.060120] x5 : ffff0000b98c51d0 x4 : 0000000000000000
<7>[    3.060132] x3 : ffff0000b2f08000 x2 : 00000000000000ff
<7>[    3.060145] x1 : 0000000000000000 x0 : 0000000000000001
<7>[    3.060158] Call trace:
<7>[    3.060172]  regmap_write+0x1c/0x78
<7>[    3.060183]  ti_lmu_common_set_ramp+0x60/0x70
<7>[    3.060195]  lm3697_probe+0x4d4/0x534
<7>[    3.060211]  i2c_device_probe+0x22c/0x294
<7>[    3.060225]  really_probe+0x1e0/0x468
<7>[    3.060237]  driver_probe_device+0xfc/0x140
<7>[    3.060250]  device_driver_attach+0x48/0x70
<7>[    3.060262]  __driver_attach+0x134/0x14c
<7>[    3.060275]  bus_for_each_dev+0x64/0xbc
<7>[    3.060287]  driver_attach+0x28/0x30
<7>[    3.060299]  bus_add_driver+0x110/0x1fc
<7>[    3.060312]  driver_register+0xa8/0xec
<7>[    3.060325]  i2c_register_driver+0x94/0xac
<7>[    3.060341]  lm3697_driver_init+0x20/0x28
<7>[    3.060356]  do_one_initcall+0xc4/0x228
<7>[    3.060368]  kernel_init_freeable+0x1e4/0x24c
<7>[    3.060384]  kernel_init+0x18/0x110
<7>[    3.060397]  ret_from_fork+0x10/0x18
<0>[    3.060415] Code: 910003fd a90153f3 aa0003f3 f90013f5 (b941e400)
<4>[    3.060439] ---[ end trace fcc24bd799273148 ]---

From 0dfd5ab647ccbc585c543d702b44d20f0e3fe436 Mon Sep 17 00:00:00 2001
From: Ultracoolguy <ultracoolguy@tutanota.com>
Date: Fri, 2 Oct 2020 18:27:00 -0400
Subject: [PATCH] leds:lm3697:Fix out-of-bound access

If both led banks aren't used in device tree,
an out-of-bounds condition in lm3697_init occurs
because of the for loop assuming that all the banks are used.
Fix it by adding a variable that contains the number of used banks.

Signed-off-by: Ultracoolguy <ultracoolguy@tutanota.com>
---
drivers/leds/leds-lm3697.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/leds/leds-lm3697.c b/drivers/leds/leds-lm3697.c
index 024983088d59..a4ec2b6077e6 100644
--- a/drivers/leds/leds-lm3697.c
+++ b/drivers/leds/leds-lm3697.c
@@ -56,7 +56,7 @@ struct lm3697_led {
struct ti_lmu_bank lmu_data;
int control_bank;
int enabled;
- int num_leds;
+ int num_led_strings;
};

/**
@@ -78,6 +78,7 @@ struct lm3697 {
struct mutex lock;

int bank_cfg;
+ int num_leds;

struct lm3697_led leds[];
};
@@ -180,7 +181,7 @@ static int lm3697_init(struct lm3697 *priv)
if (ret)
dev_err(&priv->client->dev, "Cannot write OUTPUT config\n");

- for (i = 0; i < LM3697_MAX_CONTROL_BANKS; i++) {
+ for (i = 0; i < priv->num_leds; i++) {
led = &priv->leds[i];
ret = ti_lmu_common_set_ramp(&led->lmu_data);
if (ret)
@@ -244,22 +245,22 @@ static int lm3697_probe_dt(struct lm3697 *priv)
led->lmu_data.lsb_brightness_reg = LM3697_CTRL_A_BRT_LSB +
led->control_bank * 2;

- led->num_leds = fwnode_property_count_u32(child, "led-sources");
- if (led->num_leds > LM3697_MAX_LED_STRINGS) {
+ led->num_led_strings = fwnode_property_count_u32(child, "led-sources");
+ if (led->num_led_strings > LM3697_MAX_LED_STRINGS) {
dev_err(&priv->client->dev, "Too many LED strings defined\n");
continue;
}

ret = fwnode_property_read_u32_array(child, "led-sources",
led->hvled_strings,
- led->num_leds);
+ led->num_led_strings);
if (ret) {
dev_err(&priv->client->dev, "led-sources property missing\n");
fwnode_handle_put(child);
goto child_out;
}

- for (j = 0; j < led->num_leds; j++)
+ for (j = 0; j < led->num_led_strings; j++)
priv->bank_cfg |=
(led->control_bank << led->hvled_strings[j]);

@@ -317,6 +318,8 @@ static int lm3697_probe(struct i2c_client *client,
if (!led)
return -ENOMEM;

+ led->num_leds = count;
+
mutex_init(&led->lock);
i2c_set_clientdata(client, led);

--
2.28.0
\
 
 \ /
  Last update: 2020-10-03 15:10    [W:0.097 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site