| From | Greg Kroah-Hartman <> | Subject | [PATCH 5.4 194/222] mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status() | Date | Wed, 22 Jan 2020 10:29:40 +0100 |
| |
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
commit 72914a8cff7e1d910c58e125e15a0da409e3135f upstream.
Cypress S26K{L|S}P{128|256|512}S datasheet says that the error bits in the status register are only valid when the "device ready" bit 7 is set. Add the check for the device ready bit in cfi_check_err_status() as that function isn't always called with this bit set.
Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++ 1 file changed, 4 insertions(+)
--- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -136,6 +136,10 @@ static void cfi_check_err_status(struct cfi->device_type, NULL); status = map_read(map, adr); + /* The error bits are invalid while the chip's busy */ + if (!map_word_bitsset(map, status, CMD(CFI_SR_DRB))) + return; + if (map_word_bitsset(map, status, CMD(0x3a))) { unsigned long chipstatus = MERGESTATUS(status);
|