Messages in this thread Patch in this message | | | From | Bryan O'Donoghue <> | Subject | [PATCH v3 02/19] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding | Date | Wed, 22 Jan 2020 18:55:53 +0000 |
| |
From: Sriharsha Allenki <sallenki@codeaurora.org>
Adds bindings for QCS404 USB PHY supporting Low-Speed, Full-Speed and Hi-Speed USB connectivity on Qualcomm chipsets.
[bod: Converted to YAML. Changed name dropping snps, 28nm components]
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org> Signed-off-by: Anu Ramanathan <anur@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- .../bindings/phy/qcom,qcs404-usb-hs.yaml | 77 +++++++++++++++++++ 1 file changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,qcs404-usb-hs.yaml
diff --git a/Documentation/devicetree/bindings/phy/qcom,qcs404-usb-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,qcs404-usb-hs.yaml new file mode 100644 index 000000000000..d71beb822ae2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qcs404-usb-hs.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qcs404-usb-hs.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys QCS-404 High-Speed PHY + +maintainers: + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> + +description: | + Qualcomm QCS-404 Low-Speed, Full-Speed, Hi-Speed USB PHY + +properties: + compatible: + enum: + - qcom,qcs404-usb-hsphy + + reg: + maxItems: 1 + description: USB PHY base address and length of the register map. + + "#phy-cells": + const: 0 + description: Should be 0. See phy/phy-bindings.txt for details. + + clocks: + minItems: 3 + maxItems: 3 + description: phandles to rpmcc ref clock, PHY AHB clock, rentention clock. + + clock-names: + items: + - const: ref + - const: phy + - const: sleep + + resets: + items: + - description: PHY core reset + - description: POR reset + + reset-names: + items: + - const: phy + - const: por + + vdd-supply: + maxItems: 1 + description: phandle to the regulator VDD supply node. + + vdda1p8-supply: + maxItems: 1 + description: phandle to the regulator 1.8V supply node. + + vdda3p3-supply: + maxItems: 1 + description: phandle to the regulator 3.3V supply node. + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + usb2_phy_prim: phy@7a000 { + compatible = "qcom,qcs404-usb-hsphy"; + reg = <0x0007a000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "phy", "sleep"; + resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, + <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy", "por"; + }; +... -- 2.25.0
| |