lkml.org 
[lkml]   [2019]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] serial: imx: adapt rx buffer and dma periods
Date
Using only 4 DMA periods for UART RX is very few if we have a high
frequency of small transfers - like in our case using Bluetooth with
many small packets via UART - causing many dma transfers but in each
only filling a fraction of a single buffer. Such a case may lead to
the situation that DMA RX transfer is triggered but no free buffer is
available. While we have addressed the dma handling already with
"dmaengine: imx-sdma: fix dma freezes" we still want to avoid
UART RX FIFO overrun. So we decrease the size of the buffers and
increase their number and the total buffer size.

Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---

Changelog v2:
- split this patch from series "Fix UART DMA freezes for iMX6"
- add Reviewed-by tag

drivers/tty/serial/imx.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 87c58f9f6390..51dc19833eab 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1034,8 +1034,6 @@ static void imx_uart_timeout(struct timer_list *t)
}
}

-#define RX_BUF_SIZE (PAGE_SIZE)
-
/*
* There are two kinds of RX DMA interrupts(such as in the MX6Q):
* [1] the RX DMA buffer is full.
@@ -1118,7 +1116,8 @@ static void imx_uart_dma_rx_callback(void *data)
}

/* RX DMA buffer periods */
-#define RX_DMA_PERIODS 4
+#define RX_DMA_PERIODS 16
+#define RX_BUF_SIZE (PAGE_SIZE / 4)

static int imx_uart_start_rx_dma(struct imx_port *sport)
{
--
2.23.0
\
 
 \ /
  Last update: 2019-09-19 12:27    [W:0.119 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site