lkml.org 
[lkml]   [2019]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Simplify PCIe hotplug indicator control
Date
PCIe defines two optional hotplug indicators: a Power indicator and an
Attention indicator. Both are controlled by the same register, and each
can be on, off or blinking. The current interfaces
(pciehp_green_led_{on,off,blink}() and pciehp_set_attention_status()) are
non-uniform and require two register writes in many cases where we could
do one.

This patchset introduces the new function pciehp_set_indicators(). It
allows one to set two indicators with a single register write. All
calls to previous interfaces (pciehp_green_led_* and
pciehp_set_attention_status()) are replaced with a new one. Thus,
the amount of duplicated code for setting indicators is reduced.

Denis Efremov (4):
PCI: pciehp: Add pciehp_set_indicators() to jointly set LED indicators
PCI: pciehp: Switch LED indicators with a single write
PCI: pciehp: Replace pciehp_set_attention_status()
PCI: pciehp: Replace pciehp_green_led_{on,off,blink}()

drivers/pci/hotplug/pciehp.h | 30 +++++++++++--
drivers/pci/hotplug/pciehp_ctrl.c | 14 +++---
drivers/pci/hotplug/pciehp_hpc.c | 74 +++++++++++--------------------
include/uapi/linux/pci_regs.h | 2 +
4 files changed, 58 insertions(+), 62 deletions(-)

--
2.21.0

\
 
 \ /
  Last update: 2019-08-11 22:00    [W:0.114 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site