lkml.org 
[lkml]   [2019]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] input: touchscreen: add delay time to device power on
Date
From: "Crag.Wang" <crag.wang@dell.com>

Delay time for MELFAS MIP4 controller is required at power on stage
regardless the existence of GPIO consumer lookup from devicetree or
ACPI device table.

There is an issue if GPIO ce is undefined in the ACPI results no delay
time for deive power on, the controller ended up in an abnormal state.

TEST=echo i2c-MLFS0000:00 > /sys/bus/i2c/drivers/mip4_ts/unbind
verify the touch function is off

echo i2c-MLFS0000:00 > /sys/bus/i2c/drivers/mip4_ts/bind
verify the touch function is on

Signed-off-by: Crag.Wang <crag.wang@dell.com>
---
drivers/input/touchscreen/melfas_mip4.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c
index 430a2bc5f7ca..8e803658fb43 100644
--- a/drivers/input/touchscreen/melfas_mip4.c
+++ b/drivers/input/touchscreen/melfas_mip4.c
@@ -374,12 +374,11 @@ static int mip4_query_device(struct mip4_ts *ts)

static int mip4_power_on(struct mip4_ts *ts)
{
- if (ts->gpio_ce) {
+ if (ts->gpio_ce)
gpiod_set_value_cansleep(ts->gpio_ce, 1);

- /* Booting delay : 200~300ms */
- usleep_range(200 * 1000, 300 * 1000);
- }
+ /* Booting delay : 200~300ms */
+ usleep_range(200 * 1000, 300 * 1000);

return 0;
}
--
2.20.1
\
 
 \ /
  Last update: 2019-07-10 05:01    [W:0.045 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site