lkml.org 
[lkml]   [2019]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] input: touchscreen: add delay time to device power on
Hi Crag,

On Wed, Jul 10, 2019 at 04:58:40PM +0800, Crag Wang wrote:
> Adding more
>
> On Wed, Jul 10, 2019 at 10:59 AM <crag0715@gmail.com> wrote:
> >
> > From: "Crag.Wang" <crag.wang@dell.com>
> >
> > Delay time for MELFAS MIP4 controller is required at power on stage
> > regardless the existence of GPIO consumer lookup from devicetree or
> > ACPI device table.
> >
> > There is an issue if GPIO ce is undefined in the ACPI results no delay
> > time for deive power on, the controller ended up in an abnormal state.
> >

If kernel does not reset the controller it should not have to wait for
reset to complete either. Since your firmware resets the controller it
also has to conform to the timing requirements.

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2019-07-12 08:50    [W:0.039 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site