lkml.org 
[lkml]   [2019]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] add coupled regulators for Exynos5422/5800
Date
From: Kamil Konieczny <k.konieczny@partner.samsung.com>

Hi,

The main purpose of this patch series is to add coupled regulators for
Exynos5422/5800 to keep constrain on voltage difference between vdd_arm
and vdd_int to be at most 300mV. In exynos-bus instead of using
regulator_set_voltage_tol() with default voltage tolerance it should be
used regulator_set_voltage_triplet() with volatege range, and this is
already present in opp/core.c code, so it can be reused. While at this,
move setting regulators into opp/core.

This patchset was tested on Odroid XU3.

The last patch depends on two previous.

Regards,
Kamil

Kamil Konieczny (2):
opp: core: add regulators enable and disable
devfreq: exynos-bus: convert to use dev_pm_opp_set_rate()

Marek Szyprowski (1):
ARM: dts: exynos: add initial data for coupled regulators for
Exynos5422/5800

arch/arm/boot/dts/exynos5420.dtsi | 34 ++--
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 4 +
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +
arch/arm/boot/dts/exynos5800.dtsi | 32 ++--
drivers/devfreq/exynos-bus.c | 172 +++++++-----------
drivers/opp/core.c | 13 ++
6 files changed, 120 insertions(+), 139 deletions(-)

--
2.22.0

\
 
 \ /
  Last update: 2019-07-08 16:12    [W:0.135 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site