lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: mmc: Add DTS property to disable DCMDs on Arasan controllers
Date
Direct commands (DCMDs) are an optional feature of eMMC 5.1's command
queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI,
which exposes a control register bit to enable the feature.
The current implementation sets this bit unconditionally.

This patch allows to surpress the feature activation,
by specifying the property disable-cqe-dcmd.

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
drivers/mmc/host/sdhci-of-arasan.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index c9e3e050ccc8..88dc3f00a5be 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -832,7 +832,10 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
host->mmc_host_ops.start_signal_voltage_switch =
sdhci_arasan_voltage_switch;
sdhci_arasan->has_cqe = true;
- host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+ host->mmc->caps2 |= MMC_CAP2_CQE;
+
+ if (!of_property_read_bool(np, "disable-cqe-dcmd"))
+ host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
}

ret = sdhci_arasan_add_host(sdhci_arasan);
--
2.11.0
\
 
 \ /
  Last update: 2019-03-01 17:45    [W:0.053 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site