lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] dt-bindings: mmc: Add a new property disable-cqe-dcmd.
Date
This patch documents the new proprty disable-cqe-dcmd
for the Arasan eMMC 5.1 driver.

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
---
Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 1edbb049cccb..ec699bf98b7c 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -44,6 +44,10 @@ Optional Properties:
properly. Test mode can be used to force the controller to function.
- xlnx,int-clock-stable-broken: when present, the controller always reports
that the internal clock is stable even when it is not.
+ - disable-cqe-dcmd: The eMMC 5.1 standard specifies direct commands (DCMDs)
+ as part of the command queue engine (CQE). On controllers with a CQHCI,
+ such as the Arasan eMMC 5.1 host controller, the driver has to enable DCMDs.
+ This is done unless disable-cqe-dcmd is specified.

Example:
sdhci@e0100000 {
--
2.11.0
\
 
 \ /
  Last update: 2019-03-01 17:45    [W:0.144 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site