lkml.org 
[lkml]   [2019]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 1/7] net: phy: marvell10g: Use get_features to get the PHY abilities
On Thu, Feb 21, 2019 at 10:51:22AM +0100, Maxime Chevallier wrote:
> The Alaska family of 10G PHYs has more abilities than the ones listed in
> PHY_10GBIT_FULL_FEATURES, the exact list depending on the model.
>
> Make use of the newly introduced .get_features call to build this list,
> using genphy_c45_pma_read_abilities to build the list of supported
> linkmodes, and adding autoneg ability based on what's reported by the AN
> MMD.
>
> .config_init is still used to validate the interface_mode.
>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> drivers/net/phy/marvell10g.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
> index 9ea27acf05ad..65ef469adf58 100644
> --- a/drivers/net/phy/marvell10g.c
> +++ b/drivers/net/phy/marvell10g.c
> @@ -233,8 +233,6 @@ static int mv3310_resume(struct phy_device *phydev)
>
> static int mv3310_config_init(struct phy_device *phydev)
> {
> - int ret, val;
> -
> /* Check that the PHY interface type is compatible */
> if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
> phydev->interface != PHY_INTERFACE_MODE_XAUI &&
> @@ -242,6 +240,12 @@ static int mv3310_config_init(struct phy_device *phydev)
> phydev->interface != PHY_INTERFACE_MODE_10GKR)
> return -ENODEV;
>
> + return 0;
> +}
> +
> +static int mv3310_get_features(struct phy_device *phydev)
> +{
> + int ret, val;

Please try to keep the formatting/style consistent in the file you are
editing. A blank line here would do that. Thanks.

> if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
> val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
> if (val < 0)
> @@ -429,7 +433,7 @@ static struct phy_driver mv3310_drivers[] = {
> .phy_id = 0x002b09aa,
> .phy_id_mask = MARVELL_PHY_ID_MASK,
> .name = "mv88x3310",
> - .features = PHY_10GBIT_FEATURES,
> + .get_features = mv3310_get_features,
> .soft_reset = gen10g_no_soft_reset,
> .config_init = mv3310_config_init,
> .probe = mv3310_probe,
> --
> 2.19.2
>
>

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

\
 
 \ /
  Last update: 2019-02-21 11:23    [W:0.055 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site