lkml.org 
[lkml]   [2019]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH net-next 0/7] net: phy: marvell10g: Add 2.5GBaseT
    Date
    This series adds the missing bits necessary to fully support 2.5GBaseT
    in the Marvell Alaska PHYs.

    The main points for that support are :

    - Making use of the .get_features call, recently introduced by Heiner
    and Andrew, that allows having a fully populated list of supported
    modes, including 2500BaseT.

    - Configuring the MII to 2500BaseX when establishing a link at 2.5G

    - Adding a small quirk to take into account the fact that some PHYs in
    the family won't report the correct supported abilities

    The rest of the series consists of small cosmetic improvements such as
    using the correct helper to set a linkmode bit and adding macros for the
    PHY ids.

    We also add support for the 88E2110 PHY, which doesn't require the
    quirk, and support for 2500BaseT in the PPv2 driver, in order to have a
    fully working setup on the MacchiatoBin board.

    Maxime Chevallier (7):
    net: phy: marvell10g: Use get_features to get the PHY abilities
    net: phy: marvell10g: Use linkmode_set_bit helper instead of __set_bit
    net: phy: marvell10g: Use 2500BASEX when using 2.5GBASET
    net: phy: marvell10g: Use a #define for 88X3310 family id
    net: phy: marvell10g: Force reading of 2.5/5G
    net: mvpp2: Add 2.5GBaseT support
    net: phy: marvell10g: add support for the 88x2110 PHY

    .../net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 +
    drivers/net/phy/marvell10g.c | 92 ++++++++++++++++---
    include/linux/marvell_phy.h | 2 +
    3 files changed, 81 insertions(+), 14 deletions(-)

    --
    2.19.2

    \
     
     \ /
      Last update: 2019-02-21 10:52    [W:3.316 / U:23.484 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site