lkml.org 
[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/8] net: ethernet: stmmac: update to support all PHY config for stm32mp157c.
Date
On 2/14/19 4:15 PM, Andrew Lunn wrote:
>> Sorry, I've misunderstood your question ;-)
>>
>> And you spoke about :
>>
>> case PHY_INTERFACE_MODE_RGMII:
>> case PHY_INTERFACE_MODE_RGMII_ID:
>> case PHY_INTERFACE_MODE_RGMII_RXID:
>> case PHY_INTERFACE_MODE_RGMII_TXID:
>>
>> So in my setup I've only RGMII interface, so I've never tested 3 others
>> interfaces (_ID, _RXID, _TXID).
>>
>> So do I need to add cases in my driver ?
>
> Yes. They all indicate the MAC should be using RGMII.
>
> This appears to be an old issue, but now would be a good time to fix
> it.
>
> Andrew
>
Ok Andrew, I will update with these

Thanks

Christophe
\
 
 \ /
  Last update: 2019-02-14 16:53    [W:0.047 / U:3.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site