lkml.org 
[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/8] net: ethernet: stmmac: update to support all PHY config for stm32mp157c.
> Sorry, I've misunderstood your question ;-)
>
> And you spoke about :
>
> case PHY_INTERFACE_MODE_RGMII:
> case PHY_INTERFACE_MODE_RGMII_ID:
> case PHY_INTERFACE_MODE_RGMII_RXID:
> case PHY_INTERFACE_MODE_RGMII_TXID:
>
> So in my setup I've only RGMII interface, so I've never tested 3 others
> interfaces (_ID, _RXID, _TXID).
>
> So do I need to add cases in my driver ?

Yes. They all indicate the MAC should be using RGMII.

This appears to be an old issue, but now would be a good time to fix
it.

Andrew

\
 
 \ /
  Last update: 2019-02-14 16:16    [W:0.770 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site