lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 040/321] net: bcmgenet: reapply manual settings to the PHY
Date
From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 0686bd9d5e6863f60e4bb1e78e6fe7bb217a0890 ]

The phy_init_hw() function may reset the PHY to a configuration
that does not match manual network settings stored in the phydev
structure. If the phy state machine is polled rather than event
driven this can create a timing hazard where the phy state machine
might alter the settings stored in the phydev structure from the
value read from the BMCR.

This commit follows invocations of phy_init_hw() by the bcmgenet
driver with invocations of the genphy_config_aneg() function to
ensure that the BMCR is written to match the settings held in the
phydev structure. This prevents the risk of manual settings being
accidentally altered.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 6f7278d2ce4f2..b7d75011cede5 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2619,8 +2619,10 @@ static void bcmgenet_irq_task(struct work_struct *work)
spin_unlock_irq(&priv->lock);

if (status & UMAC_IRQ_PHY_DET_R &&
- priv->dev->phydev->autoneg != AUTONEG_ENABLE)
+ priv->dev->phydev->autoneg != AUTONEG_ENABLE) {
phy_init_hw(priv->dev->phydev);
+ genphy_config_aneg(priv->dev->phydev);
+ }

/* Link UP/DOWN event */
if (status & UMAC_IRQ_LINK_EVENT)
@@ -3673,6 +3675,7 @@ static int bcmgenet_resume(struct device *d)
phy_init_hw(dev->phydev);

/* Speed settings must be restored */
+ genphy_config_aneg(dev->phydev);
bcmgenet_mii_config(priv->dev, false);

bcmgenet_set_hw_addr(priv, dev->dev_addr);
--
2.20.1


\
 
 \ /
  Last update: 2019-12-03 23:50    [W:1.429 / U:1.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site