lkml.org 
[lkml]   [2018]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] Add slave DMA support for Actios Semi S900 SoC
Date
This patchset adds slave DMA support for Actions Semi S900 SoC of the
Owl family. As a consumer, enable TX DMA support for UART peripheral
in S900. The UART driver still supports interrupt mode if there is no
DMA property specified in DT.

The dts patch depends on the previous DMA patches which is not yet
merged.

Thanks,
Mani

Manivannan Sadhasivam (3):
arm64: dts: actions: s900: Enable Tx DMA for UART5
dmaengine: Add Slave and Cyclic mode support for Actions Semi Owl S900
SoC
tty: serial: Add Tx DMA support for UART in Actions Semi Owl SoCs

arch/arm64/boot/dts/actions/s900.dtsi | 2 +
drivers/dma/owl-dma.c | 273 +++++++++++++++++++++++++-
drivers/tty/serial/owl-uart.c | 172 +++++++++++++++-
3 files changed, 439 insertions(+), 8 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2018-09-01 18:43    [W:1.273 / U:2.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site