lkml.org 
[lkml]   [2018]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL for 4.9 126/293] libata: Add the AHCI_HFLAG_YES_ALPM flag
Date
From: Doug Berger <opendmb@gmail.com>

[ Upstream commit ef0da1bf767d9e557c6375c7066717eead54cb15 ]

Some hardware is capable of supporting Aggresive Link Power Management
even though it is not indicated by the Host Capability register.

This commit adds the AHCI_HFLAG_YES_ALPM flag to the AHCI library to
allow indication of this quirk when the Host Capability register is
Read Only and therefore cannot be changed.

Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/ata/ahci.h | 1 +
drivers/ata/libahci.c | 5 +++++
2 files changed, 6 insertions(+)

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 0cc08f892fea..bd9ba1640b56 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -248,6 +248,7 @@ enum {
AHCI_HFLAG_MULTI_MSI = 0,
#endif
AHCI_HFLAG_WAKE_BEFORE_STOP = (1 << 22), /* wake before DMA stop */
+ AHCI_HFLAG_YES_ALPM = (1 << 23), /* force ALPM cap on */

/* ap->flags bits */

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 0d028ead99e8..e9eb98a33467 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -503,6 +503,11 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
cap &= ~HOST_CAP_FBS;
}

+ if (!(cap & HOST_CAP_ALPM) && (hpriv->flags & AHCI_HFLAG_YES_ALPM)) {
+ dev_info(dev, "controller can do ALPM, turning on CAP_ALPM\n");
+ cap |= HOST_CAP_ALPM;
+ }
+
if (hpriv->force_port_map && port_map != hpriv->force_port_map) {
dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, hpriv->force_port_map);
--
2.15.1
\
 
 \ /
  Last update: 2018-04-09 04:20    [W:1.259 / U:1.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site