lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2,0/3] tty/serial: meson_uart: add support for core clock handling
Date
To be able to use the three none AO uarts of the s905 SoCs (uart_A, uart_B
& uart_C), the core clock has to be enabled. (see chapter 22.3 of the
public s905 data sheet) At least the u-boot of my s905 based media player
(netxeon minimx) doesn't do this. so the driver must do it.

This patch set does:
- exposes the clock ids to the dtb
- adds documentation for the dt-bindings of meson_uart
- adds the core clock handling to the driver

The patchset is based on the branch master of the repository in [1]

Changes since v1
- use git to produce the patch set
- added the clock ids for uart_B and uart_C

None of the available s905 dts use uart_A actively. So there is no patch
for any of the existing dts files.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git

Helmut Klein (3):
tty/serial: meson_uart: expose CLKID_UARTx
tty/serial: meson_uart: add documentation for the dt-bindings
tty/serial: meson_uart: add the core clock handling to the driver

.../bindings/serial/amlogic,meson_uart.txt | 25 ++++++++++++++++++++++
drivers/clk/meson/gxbb.h | 6 +++---
drivers/tty/serial/meson_uart.c | 10 +++++++++
include/dt-bindings/clock/gxbb-clkc.h | 3 +++
4 files changed, 41 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt

--
2.11.0

\
 
 \ /
  Last update: 2017-03-28 11:29    [W:1.033 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site