lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2,2/3] tty/serial: meson_uart: add documentation for the dt-bindings
From
Date
Hallo Mark,

i will add your text to the patch.

Helmut

On 28.03.2017 12:05, Mark Rutland wrote:
> On Tue, Mar 28, 2017 at 11:25:44AM +0200, Helmut Klein wrote:
>> Add the documentation for the device tree binding of meson_uart
>>
>> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
>> ---
>> .../bindings/serial/amlogic,meson_uart.txt | 25 ++++++++++++++++++++++
>> 1 file changed, 25 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
>>
>> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
>> new file mode 100644
>> index 000000000000..6f94ba25760d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
>> @@ -0,0 +1,25 @@
>> +* Amlogic Meson UART, used in multiple SoCs (e.g. S905, s905X, ...)
>> +
>> +Required properties:
>> +- compatible : "amlogic,meson-uart"
>> +- reg : offset and length of the register set for the device.
>> +- interrupts : device interrupt
>> +- clocks : the baud rate clock for the UART and optionally the core clock for the none AO uarts
>> +e.g.
>> +uart_A: serial@84c0 {
>> + compatible = "amlogic,meson-uart";
>> + reg = <0x0 0x84c0 0x0 0x14>;
>> + pinctrl-0 = <&uart_a_pins &uart_a_cts_rts_pins>;
>> + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
>> + clocks = <&xtal>, <&clkc CLKID_UART0>;
>> + clock-names = "xtal", "core";
>
> Please define these explicitly above, e.g.
>
> - clocks: a list of phandle + clock-specifier pairs, one for each entry
> in clock names.
> - clock-names: contains:
> * "xtal" for the baud rate clock
> * "core" for the non-AO UARTs (optional)
>
> Thanks,
> Mark.
>

\
 
 \ /
  Last update: 2017-03-28 20:22    [W:0.041 / U:1.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site